# ilink,6 and permalinks?

**URL:** <https://community.allstarlink.org/t/ilink-6-and-permalinks/13120>\
**Category:** AllStarLink\
**Created:** [March 20, 2017, 3:36am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120 "2017-03-20T03:36:43Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![W9CR](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/ecae2f/32.png) [@W9CR](https://community.allstarlink.org/u/W9CR)\
**Post date:** [March 20, 2017, 3:36am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/1 "2017-03-20T03:36:43Z")

</div>

I've been looking for a version of this command which will remove all  
connected links excluding permalinks.

It doesn't appear there is an easy way to do this in the code, does anyone  
have any ideas as how to do it?

73's

> **···**
>
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)

---

<div class="post-metadata">

**Author:** ![Lorentedford](https://community.allstarlink.org/user_avatar/community.allstarlink.org/lorentedford/32/578_2.png) [@Lorentedford](https://community.allstarlink.org/u/Lorentedford)\
**Post date:** [March 20, 2017, 5:57am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/2 "2017-03-20T05:57:46Z")

</div>

Why not run a shell script to disconnect all nodes then reconnect the nodes that you wish to be connected…

Loren Tedford (KC9ZHV)  
Email: [lorentedford@gmail.com](mailto:lorentedford@gmail.com)  
Phone:  
Fax:  
[http://www.lorentedford.com](http://www.lorentedford.com)  
[http://kc9zhv.com](http://kc9zhv.com)

> **···**
>
> On Mar 19, 2017 10:36 PM, “Bryan Fields” [Bryan@bryanfields.net](mailto:Bryan@bryanfields.net) wrote:
> 
> > I’ve been looking for a version of this command which will remove all
> > 
> > connected links excluding permalinks.
> > 
> > It doesn’t appear there is an easy way to do this in the code, does anyone
> > 
> > have any ideas as how to do it?
> > 
> > 73’s
> > 
> > –
> > 
> > Bryan Fields
> > 
> > 727-409-1194 - Voice
> > 
> > [http://bryanfields.net](http://bryanfields.net)
> > 
> > * * *
> > 
> > App\_rpt-users mailing list
> > 
> > [App\_rpt-users@lists.allstarlink.org](mailto:App_rpt-users@lists.allstarlink.org)
> > 
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
> > 
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

<div class="post-metadata">

**Author:** ![tsawyer](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/eb8c5e/32.png) [@tsawyer](https://community.allstarlink.org/u/tsawyer)\
**Post date:** [March 20, 2017, 2:37pm UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/3 "2017-03-20T14:37:38Z")

</div>

Put this under your [functions] stanza. Make xx whatever you want for the disconnect command.

xx=ilink,6 ; disconnect all nodes

Here a list of ilink commands from the app\_rpt source

- ilink cmds:

> **···**
>
> On Sun, Mar 19, 2017 at 8:36 PM, Bryan Fields [Bryan@bryanfields.net](mailto:Bryan@bryanfields.net) wrote:
> 
> > I’ve been looking for a version of this command which will remove all
> > 
> > connected links excluding permalinks.
> > 
> > It doesn’t appear there is an easy way to do this in the code, does anyone
> > 
> > have any ideas as how to do it?
> > 
> > 73’s
> > 
> > –
> > 
> > Bryan Fields
> > 
> > 727-409-1194 - Voice
> > 
> > [http://bryanfields.net](http://bryanfields.net)
> > 
> > * * *
> > 
> > App\_rpt-users mailing list
> > 
> > [App\_rpt-users@lists.allstarlink.org](mailto:App_rpt-users@lists.allstarlink.org)
> > 
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
> > 
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> –
> 
> –
> 
> Tim

---

<div class="post-metadata">

**Author:** ![W9CR](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/ecae2f/32.png) [@W9CR](https://community.allstarlink.org/u/W9CR)\
**Post date:** [March 21, 2017, 1:50am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/4 "2017-03-21T01:50:24Z")

</div>

I think you misunderstood what I was asking.

I'm looking for a command to disconnect all nodes other than permalink nodes.

> **···**
>
> On 3/20/17 10:37 AM, Tim Sawyer wrote:
> 
> > Put this under your [functions] stanza. Make xx whatever you want for the  
> > disconnect command.
> > 
> > xx=ilink,6 ; disconnect all nodes
> 
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)

---

<div class="post-metadata">

**Author:** ![Bob\_Pyke](https://community.allstarlink.org/user_avatar/community.allstarlink.org/bob_pyke/32/1396_2.png) [@Bob\_Pyke](https://community.allstarlink.org/u/Bob_Pyke)\
**Post date:** [March 21, 2017, 4:32am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/5 "2017-03-21T04:32:00Z")

</div>

Is that not \*71

Thanks,  
Bob  
k6ecm  
73

> **···**
>
> Sent from iPad
> 
> > On Mar 20, 2017, at 6:50 PM, Bryan Fields \<Bryan@bryanfields.net\> wrote:
> > 
> > > On 3/20/17 10:37 AM, Tim Sawyer wrote:  
> > > Put this under your [functions] stanza. Make xx whatever you want for the  
> > > disconnect command.
> > > 
> > > xx=ilink,6 ; disconnect all nodes
> > 
> > I think you misunderstood what I was asking.
> > 
> > I'm looking for a command to disconnect all nodes other than permalink nodes.
> > 
> > --  
> > Bryan Fields
> > 
> > 727-409-1194 - Voice  
> > [http://bryanfields.net](http://bryanfields.net)  
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > App\_rpt-users mailing list  
> > App\_rpt-users@lists.allstarlink.org  
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

<div class="post-metadata">

**Author:** ![W9CR](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/ecae2f/32.png) [@W9CR](https://community.allstarlink.org/u/W9CR)\
**Post date:** [March 21, 2017, 4:56am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/6 "2017-03-21T04:56:57Z")

</div>

No, it's not.

ilink,6 disconnects all nodes, I'm looking for a way I can have it disconnect  
all normal ilink,2/3 linked nodes, but leave the permalinks (ilink,12/13)  
connected.

> **···**
>
> On 3/21/17 12:32 AM, Bob Pyke wrote:
> 
> > Is that not \*71
> 
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)

---

<div class="post-metadata">

**Author:** ![David\_McGough](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/d/7cd45c/32.png) [@David\_McGough](https://community.allstarlink.org/u/David_McGough)\
**Post date:** [March 21, 2017, 6:16am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/7 "2017-03-21T06:16:50Z")

</div>

Hi Brian,

There is no current way to disconnect all normal connections while leaving  
permanent connection linked, as far as I know (and I've been through that  
code a lot).

On the node where the permanent connection is initiated, some code could  
be added to accomplish selective disconnects, theoretically  
speaking---something like a modified ilink,16 command. The only difference  
between permanent and normal connection is the setting of the internal  
"max\_retries" variable to a huge value (in app\_rpt.c, see the name:  
MAX\_RETRIES\_PERM) and the setting of the "perma" variable, which is simply  
a flag---so, connections are really permanent, but connect retries go on  
for a very long time! ...In app\_rpt.c, see the comment:

/\* Make a string of disconnected nodes for possible restoration \*/

In app\_rpt, the initiating node is to only place where the"max\_retries"  
and "perma" variables are visible...From the "target" node's perspective  
(i.e.: the node which was connected TO via a permanent connect command),  
there is no way to tell any difference, unfortunately, so no way to  
perform a selective disconnect without changes to telemetry.

...It would be nice if more comprehensive telemetry info got passed  
between nodes, but, that can't happen without potentially breaking all  
legacy nodes which haven't upgraded.

73, David KB4FXC

> **···**
>
> On Tue, 21 Mar 2017, Bryan Fields wrote:
> 
> > On 3/21/17 12:32 AM, Bob Pyke wrote:  
> > Is that not \*71
> 
> No, it's not.
> 
> ilink,6 disconnects all nodes, I'm looking for a way I can have it disconnect  
> all normal ilink,2/3 linked nodes, but leave the permalinks (ilink,12/13)  
> connected.  
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)  
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> App\_rpt-users mailing list  
> App\_rpt-users@lists.allstarlink.org  
> [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> 
> To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

<div class="post-metadata">

**Author:** ![David\_McGough](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/d/7cd45c/32.png) [@David\_McGough](https://community.allstarlink.org/u/David_McGough)\
**Post date:** [March 21, 2017, 6:20am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/8 "2017-03-21T06:20:11Z")

</div>

Oops, typo, below should read: "so, connections are NOT really permanent,"

Hi Brian,

There is no current way to disconnect all normal connections while leaving  
permanent connection linked, as far as I know (and I've been through that  
code a lot).

On the node where the permanent connection is initiated, some code could  
be added to accomplish selective disconnects, theoretically  
speaking---something like a modified ilink,16 command. The only difference  
between permanent and normal connection is the setting of the internal  
"max\_retries" variable to a huge value (in app\_rpt.c, see the name:  
MAX\_RETRIES\_PERM) and the setting of the "perma" variable, which is simply  
a flag---so, connections NOT are really permanent, but connect retries go  
on for a very long time! ...In app\_rpt.c, see the comment:

/\* Make a string of disconnected nodes for possible restoration \*/

In app\_rpt, the initiating node is to only place where the"max\_retries"  
and "perma" variables are visible...From the "target" node's perspective  
(i.e.: the node which was connected TO via a permanent connect command),  
there is no way to tell any difference, unfortunately, so no way to  
perform a selective disconnect without changes to telemetry.

...It would be nice if more comprehensive telemetry info got passed  
between nodes, but, that can't happen without potentially breaking all  
legacy nodes which haven't upgraded.

73, David KB4FXC

> **···**
>
> On Tue, 21 Mar 2017, David McGough wrote:
> 
> On Tue, 21 Mar 2017, Bryan Fields wrote:
> 
> > On 3/21/17 12:32 AM, Bob Pyke wrote:  
> > Is that not \*71
> 
> No, it's not.
> 
> ilink,6 disconnects all nodes, I'm looking for a way I can have it disconnect  
> all normal ilink,2/3 linked nodes, but leave the permalinks (ilink,12/13)  
> connected.  
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)  
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> App\_rpt-users mailing list  
> App\_rpt-users@lists.allstarlink.org  
> [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> 
> To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> App\_rpt-users mailing list  
> App\_rpt-users@lists.allstarlink.org  
> [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> 
> To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

<div class="post-metadata">

**Author:** ![Luvencl8](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/l/e495f1/32.png) [@Luvencl8](https://community.allstarlink.org/u/Luvencl8)\
**Post date:** [March 21, 2017, 2:52pm UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/9 "2017-03-21T14:52:49Z")

</div>

I just do a macro that does ilink 6 and then the perm links again.

Lu Vencl

> **···**
>
> > On Mar 21, 2017, at 2:16 AM, David McGough \<kb4fxc@inttek.net\> wrote:
> > 
> > Hi Brian,
> > 
> > There is no current way to disconnect all normal connections while leaving  
> > permanent connection linked, as far as I know (and I've been through that  
> > code a lot).
> > 
> > On the node where the permanent connection is initiated, some code could  
> > be added to accomplish selective disconnects, theoretically  
> > speaking---something like a modified ilink,16 command. The only difference  
> > between permanent and normal connection is the setting of the internal  
> > "max\_retries" variable to a huge value (in app\_rpt.c, see the name:  
> > MAX\_RETRIES\_PERM) and the setting of the "perma" variable, which is simply  
> > a flag---so, connections are really permanent, but connect retries go on  
> > for a very long time! ...In app\_rpt.c, see the comment:
> > 
> > /\* Make a string of disconnected nodes for possible restoration \*/
> > 
> > In app\_rpt, the initiating node is to only place where the"max\_retries"  
> > and "perma" variables are visible...From the "target" node's perspective  
> > (i.e.: the node which was connected TO via a permanent connect command),  
> > there is no way to tell any difference, unfortunately, so no way to  
> > perform a selective disconnect without changes to telemetry.
> > 
> > ...It would be nice if more comprehensive telemetry info got passed  
> > between nodes, but, that can't happen without potentially breaking all  
> > legacy nodes which haven't upgraded.
> > 
> > 73, David KB4FXC
> > 
> > > On Tue, 21 Mar 2017, Bryan Fields wrote:
> > > 
> > > On 3/21/17 12:32 AM, Bob Pyke wrote:  
> > > Is that not \*71
> > 
> > No, it's not.
> > 
> > ilink,6 disconnects all nodes, I'm looking for a way I can have it disconnect  
> > all normal ilink,2/3 linked nodes, but leave the permalinks (ilink,12/13)  
> > connected.  
> > --  
> > Bryan Fields
> > 
> > 727-409-1194 - Voice  
> > [http://bryanfields.net](http://bryanfields.net)  
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > App\_rpt-users mailing list  
> > App\_rpt-users@lists.allstarlink.org  
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > App\_rpt-users mailing list  
> > App\_rpt-users@lists.allstarlink.org  
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"  
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

<div class="post-metadata">

**Author:** ![W9CR](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/ecae2f/32.png) [@W9CR](https://community.allstarlink.org/u/W9CR)\
**Post date:** [March 21, 2017, 4:14pm UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/10 "2017-03-21T16:14:17Z")

</div>

If the permalinks are known, that's good, but unfortunately they can change.  
Based on David's comments I think the data needed may not be there on all  
systems to be able to do it properly.

> **···**
>
> On 3/21/17 10:52 AM, Lu V wrote:
> 
> > I just do a macro that does ilink 6 and then the perm links again.
> 
> --  
> Bryan Fields
> 
> 727-409-1194 - Voice  
> [http://bryanfields.net](http://bryanfields.net)

---

<div class="post-metadata">

**Author:** ![tsawyer](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/eb8c5e/32.png) [@tsawyer](https://community.allstarlink.org/u/tsawyer)\
**Post date:** [March 22, 2017, 2:51am UTC](https://community.allstarlink.org/t/ilink-6-and-permalinks/13120/11 "2017-03-22T02:51:04Z")

</div>

If there is a way to find out what the permalink nodes are you could script something. Maybe one of Kiel’s scripts will help. [http://www.qsl.net/k0kn/scripts.html](http://www.qsl.net/k0kn/scripts.html)

> **···**
>
> On Tue, Mar 21, 2017 at 9:14 AM, Bryan Fields [Bryan@bryanfields.net](mailto:Bryan@bryanfields.net) wrote:
> 
> > On 3/21/17 10:52 AM, Lu V wrote:
> > 
> > > I just do a macro that does ilink 6 and then the perm links again.
> > 
> > If the permalinks are known, that’s good, but unfortunately they can change.
> > 
> > Based on David’s comments I think the data needed may not be there on all
> > 
> > systems to be able to do it properly.
> > 
> > –
> > 
> > Bryan Fields
> > 
> > 727-409-1194 - Voice
> > 
> > [http://bryanfields.net](http://bryanfields.net)
> > 
> > * * *
> > 
> > App\_rpt-users mailing list
> > 
> > [App\_rpt-users@lists.allstarlink.org](mailto:App_rpt-users@lists.allstarlink.org)
> > 
> > [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users)
> > 
> > To unsubscribe from this list please visit [http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
> > 
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> –
> 
> –
> 
> Tim
