Help , no audio in

Can any one help…please!!!
What I have …
Raspberry Pi 4
Usb fob cm108 not modified (Using Vox)
Easy digi vox
Uv-5R
All starlink up and running…
Problem…
No Audio in…if I send *81 or any other code to node from other radio , no answer back.
Using Cli :

  • rpt fun 51024 *81 … I receive …the time
    . rpt fun 51024 *70 … I receive …node 51024 rpt/repeat only.

On rx voice display , when I key other radio have a full scale moving, so I guess audio is comming in.

  • I did not set up any ctcss tone on radio…
    Rx channel is set to 600.

Also after 3 minutes i have the Ip address, and a message saying “Node Timeout”

I’m really new at linux and allstarlink, really need to make this work…willing to pay someone to help me made it happen…any volunteer with a little pacience?

Thanks

Are you using Hamvoip?
GeorgeC W2DB

He has to be. ASL doesn’t run on the Pi 4

Yes I’m using Hamvoip , i downloaded the image and thats what i’m using

Update …

  1. now i do not have the time out.

  2. As soon as it boots , it is giving me the IP

3 every hour it gaive me the time.

4 what i changed is the las settings on the ctcss changed to PP

But still audio is not going in …i hook an speaker and can hear when i key the radio voice and dtmf sounds .

  1. It is responding to all Cli comands rpt fun *80 *81,and so
···

On Fri, Feb 7, 2020, 08:13 WQXN966 Jason via AllStarLink Discussion Groups noreply@community.allstarlink.org wrote:


WQXN966_Jason

    February 7

He has to be. ASL doesn’t run on the Pi 4


Visit Topic or reply to this email to respond.


In Reply To


w2db

    February 7

Are you using Hamvoip? GeorgeC W2DB


Visit Topic or reply to this email to respond.

To unsubscribe from these emails, click here.

Absolutely im using HamVoip

···

On Fri, Feb 7, 2020, 01:04 George Csahanin via AllStarLink Discussion Groups noreply@community.allstarlink.org wrote:


w2db

    February 7

Are you using Hamvoip?

GeorgeC W2DB


Visit Topic or reply to this email to respond.

To unsubscribe from these emails, click here.

Might be better to ask over on their mail list. They can probably give you specific answers.

GeorgeC W2DB