So, that has been seen from time to time.
Personally, I have never used the menu set-up so I have a hard time knowing exactly how it does it’s thing. But I should look at it sometime. I have done it as manual as it was in the beginning.
So the first thing to do is watch to see if your tones are being decoded.
Easiest way to do that is to watch asterisk LIVE.
from a command line
asterisk -r -vvv (the -vvv is the verbosity level, more v’s more verbose)
Watch the decoded info as well as reply by the software.
If it is not catching your tones, you have a audio issue likely. Could be error on some of those cheap radio HT’s as well.
But that is your first step.
I should ask for the other issue…
what method of COS/COR are you using as described in simpleusb.conf