# First log in to Pi **URL:** \ **Category:** AllStarLink\ **Tags:** new-users\ **Created:** [May 20, 2020, 11:45am UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005 "2020-05-20T11:45:58Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![VK3MIT-Tim](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/54ee81/32.png) [@VK3MIT-Tim](https://community.allstarlink.org/u/VK3MIT-Tim)\ **Post date:** [May 20, 2020, 11:45am UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/1 "2020-05-20T11:45:59Z")
Hello Group; New user here. I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. I then get “access denied”. I have tried multiple times, and done multiple image burns, to no avail. Can anyone assist me to get past this stumbling block so I can get to the set up menu? Many thanks - Tim. VK3MIT ---
**Author:** ![KE6PCV](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ke6pcv/32/429_2.png) [@KE6PCV](https://community.allstarlink.org/u/KE6PCV)\ **Post date:** [May 20, 2020, 5:53pm UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2 "2020-05-20T17:53:23Z")
Tim, What location are you downloading your image from? Marshall > **···** > > **From:** Timothy Mc Bain via AllStarLink Discussion Groups [[mailto:noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org)] > **Sent:** Wednesday, May 20, 2020 4:56 AM > **To:** [ke6pcv@cal-net.org](mailto:ke6pcv@cal-net.org) > **Subject:** [AllStarLink Discussion Groups] First log in to Pi > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > Hello Group; > > New user here. > > I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. > > I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. > > I then get “access denied”. I have tried multiple times, and done multiple image burns, to no avail. > > Can anyone assist me to get past this stumbling block so I can get to the set up menu? > > Many thanks - Tim. > VK3MIT > > * * * > > [**Visit Topic**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/1) or reply to this email to respond. > > You are receiving this because you enabled mailing list mode. > > To unsubscribe from these emails, [**click here**](https://community.allstarlink.org/email/unsubscribe/53f5278c2761df0af52b59df1de0054538eb378b6fdd4f312c9d09802005f17e). ---
**Author:** ![VK3MIT-Tim](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/54ee81/32.png) [@VK3MIT-Tim](https://community.allstarlink.org/u/VK3MIT-Tim)\ **Post date:** [May 20, 2020, 8:08pm UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/3 "2020-05-20T20:08:58Z")
Hi Marshall; sorry to be a pain… The image is from the ASL web site - downloads fine, unzips fine, burns onto the SD fine, appears to run fine in the Pi, just won’t progress beyond login as repeater/access denied. I can log in as root, and I get the auto update process happening, and end up at a root login prompt, but I can’t get to the ASL setup cli from root as it wants to be user repeater. It’ll try to switch user to repeater, but fails on the repeater default password. Tim. > **···** > > > On 21 May 2020, at 04:03, Marshall Oldham via AllStarLink Discussion Groups [noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org) wrote: > > > > > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg "KE6PCV") > > [KE6PCV](https://community.allstarlink.org/u/ke6pcv) > > ASL Admin > > > > ``` > > May 20 > > > > ``` > > > > Tim, > > > What location are you downloading your image from? > > > Marshall > > > ··· [(click for more details)](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > > * * * > > > > [Visit Topic](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) or reply to this email to respond. > > > * * * > > > > #### In Reply To > > > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png "VK3MIT-Tim") > > [VK3MIT-Tim](https://community.allstarlink.org/u/vk3mit-tim) > > > > ``` > > May 20 > > > > ``` > > > > Hello Group; New user here. I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. I then get “acce… > > > * * * > > > > [Visit Topic](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) or reply to this email to respond. > > > To unsubscribe from these emails, [click here](https://community.allstarlink.org/email/unsubscribe/f68bc8a84640f8375e642fbebd090966624a021391a97e1ad627d1f91cc51857). ---
**Author:** ![KE6PCV](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ke6pcv/32/429_2.png) [@KE6PCV](https://community.allstarlink.org/u/KE6PCV)\ **Post date:** [May 20, 2020, 9:43pm UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/4 "2020-05-20T21:43:22Z")
Tim, Start over and try the following burning the image onto your mirco sd card again. Then install the micro sd into the Pi and boot. Do the following. Login: repeater Passsword: allstarlink User repeater has sudo privileges (sudo -s) Note: You really do not need to login at user ROOT or even setup with user ROOT. There have been updates to the operating system since this image was built. Run the following commands after the first time you boot. sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot at the # prompt run “asl-menu” to setup your node. Read this on the wiki all the way to the end it has directions to walk you through setting up your node with screen shots. [https://wiki.allstarlink.org/wiki/Beginners\_Guide](https://wiki.allstarlink.org/wiki/Beginners_Guide) Marshall - ke6pcv > **···** > > **From:** Timothy Mc Bain via AllStarLink Discussion Groups [[mailto:noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org)] > **Sent:** Wednesday, May 20, 2020 1:19 PM > **To:** [ke6pcv@cal-net.org](mailto:ke6pcv@cal-net.org) > **Subject:** [AllStarLink Discussion Groups] First log in to Pi > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > Hi Marshall; sorry to be a pain… > > The image is from the ASL web site - downloads fine, unzips fine, burns onto the SD fine, appears to run fine in the Pi, just won’t progress beyond login as repeater/access denied. > > I can log in as root, and I get the auto update process happening, and end up at a root login prompt, but I can’t get to the ASL setup cli from root as it wants to be user repeater. It’ll try to switch user to repeater, but fails on the repeater default password. > > Tim. > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/3) > > * * * > > [**Visit Topic**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/3) or reply to this email to respond. > > * * * > > #### In Reply To > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg) > > [**KE6PCV**](https://community.allstarlink.org/u/ke6pcv) ASL Admin > May 20 > > Tim, What location are you downloading your image from? Marshall ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > #### Previous Replies > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg) > > [**KE6PCV**](https://community.allstarlink.org/u/ke6pcv) ASL Admin > May 20 > > Tim, > > What location are you downloading your image from? > > Marshall > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > Hello Group; > > New user here. > > I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. > > I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. > > I then get “access denied”. I have tried multiple times, and done multiple image burns, to no avail. > > Can anyone assist me to get past this stumbling block so I can get to the set up menu? > > Many thanks - Tim. > VK3MIT > > * * * > > [**Visit Topic**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/3) or reply to this email to respond. > > You are receiving this because you enabled mailing list mode. > > To unsubscribe from these emails, [**click here**](https://community.allstarlink.org/email/unsubscribe/bc36a9862b31f0679ef71291de52b22cc55f960183a2e0d48f3f6d464f0d9b7b). ---
**Author:** ![VK3MIT-Tim](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/v/54ee81/32.png) [@VK3MIT-Tim](https://community.allstarlink.org/u/VK3MIT-Tim)\ **Post date:** [May 20, 2020, 9:49pm UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/5 "2020-05-20T21:49:18Z")
I downloaded Raslink-20.04 Win 10 machine, used “Etcher” to put the unzipped ISO onto the SD card. T. > **···** > > > On 21 May 2020, at 06:09, Timothy Mc Bain VK3MIT [vk3mit@gmail.com](mailto:vk3mit@gmail.com) wrote: > > > Hi Marshall; sorry to be a pain… > > > The image is from the ASL web site - downloads fine, unzips fine, burns onto the SD fine, appears to run fine in the Pi, just won’t progress beyond login as repeater/access denied. > > > > > > I can log in as root, and I get the auto update process happening, and end up at a root login prompt, but I can’t get to the ASL setup cli from root as it wants to be user repeater. It’ll try to switch user to repeater, but fails on the repeater default password. > > > > Tim. > > > > On 21 May 2020, at 04:03, Marshall Oldham via AllStarLink Discussion Groups [noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org) wrote: > > > > > > > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg "KE6PCV") > > > [KE6PCV](https://community.allstarlink.org/u/ke6pcv) > > > ASL Admin > > > > > > ``` > > > May 20 > > > > > > ``` > > > > > > Tim, > > > > What location are you downloading your image from? > > > > Marshall > > > > ··· [(click for more details)](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > > > * * * > > > > > > [Visit Topic](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) or reply to this email to respond. > > > > * * * > > > > > > #### In Reply To > > > > > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png "VK3MIT-Tim") > > > [VK3MIT-Tim](https://community.allstarlink.org/u/vk3mit-tim) > > > > > > ``` > > > May 20 > > > > > > ``` > > > > > > Hello Group; New user here. I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. I then get “acce… > > > > * * * > > > > > > [Visit Topic](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) or reply to this email to respond. > > > > To unsubscribe from these emails, [click here](https://community.allstarlink.org/email/unsubscribe/f68bc8a84640f8375e642fbebd090966624a021391a97e1ad627d1f91cc51857). ---
**Author:** ![KE6PCV](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ke6pcv/32/429_2.png) [@KE6PCV](https://community.allstarlink.org/u/KE6PCV)\ **Post date:** [May 20, 2020, 10:34pm UTC](https://community.allstarlink.org/t/first-log-in-to-pi/17005/6 "2020-05-20T22:34:10Z")
Tim, I am not familiar with what Raslink is, it’s not an ASL image. Go here to download the lastest ASL image for the Raspberry Pi. [http://dvswitch.org/files/ASL\_Images/Raspberry\_Pi/Stretch/](http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/) Use this image and you should be good to go if you follow the directions. Marshall > **···** > > **From:** Timothy Mc Bain via AllStarLink Discussion Groups [[mailto:noreply@community.allstarlink.org](mailto:noreply@community.allstarlink.org)] > **Sent:** Wednesday, May 20, 2020 3:00 PM > **To:** [ke6pcv@cal-net.org](mailto:ke6pcv@cal-net.org) > **Subject:** [AllStarLink Discussion Groups] First log in to Pi > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > I downloaded Raslink-20.04 > > Win 10 machine, used “Etcher” to put the unzipped ISO onto the SD card. > > T. > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/5) > > * * * > > [**Visit Topic**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/5) or reply to this email to respond. > > * * * > > #### In Reply To > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg) > > [**KE6PCV**](https://community.allstarlink.org/u/ke6pcv) ASL Admin > May 20 > > Tim, What location are you downloading your image from? Marshall ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > #### Previous Replies > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg) > > [**KE6PCV**](https://community.allstarlink.org/u/ke6pcv) ASL Admin > May 20 > > Tim, > > Start over and try the following burning the image onto your mirco sd card again. > > Then install the micro sd into the Pi and boot. > > Do the following. > > Login: repeater > > Passsword: allstarlink > > User repeater has sudo privileges (sudo -s) > > Note: You really do not need to login at user ROOT or even setup with user ROOT. > > There have been updates to the operating system since this image was built. > > Run the following commands after the first time you boot. > > sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel > > sudo apt-get update > > sudo apt-get upgrade -y > > sudo reboot > > at the # prompt run “asl-menu” to setup your node. > > Read this on the wiki all the way to the end it has directions to walk you through setting up your node with screen shots. > > [**https://wiki.allstarlink.org/wiki/Beginners\_Guide**](https://wiki.allstarlink.org/wiki/Beginners_Guide) > > Marshall - ke6pcv > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/4) > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > Hi Marshall; sorry to be a pain… > > The image is from the ASL web site - downloads fine, unzips fine, burns onto the SD fine, appears to run fine in the Pi, just won’t progress beyond login as repeater/access denied. > > I can log in as root, and I get the auto update process happening, and end up at a root login prompt, but I can’t get to the ASL setup cli from root as it wants to be user repeater. It’ll try to switch user to repeater, but fails on the repeater default password. > > Tim. > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/3) > > ![](https://community.allstarlink.org/uploads/default/original/1X/2f7e1f95169f76fbbccd52dfddb4fea176246dfc.jpeg) > > [**KE6PCV**](https://community.allstarlink.org/u/ke6pcv) ASL Admin > May 20 > > Tim, > > What location are you downloading your image from? > > Marshall > > ··· [**(click for more details)**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/2) > > ![](https://community.allstarlink.org/uploads/default/original/2X/3/3aa60674ec5035b0b29ddaf4998c31e32e7bc9b2.png) > > [**VK3MIT-Tim**](https://community.allstarlink.org/u/vk3mit-tim) > May 20 > > Hello Group; > > New user here. > > I have just burnt the ASL image onto the SD card, loaded it into the Pi, and booted up - all as per instructions. > > I try to log in to the Pi as “repeater” using the initial login password of “allstarlink” as found in the first time set-up instructions. > > I then get “access denied”. I have tried multiple times, and done multiple image burns, to no avail. > > Can anyone assist me to get past this stumbling block so I can get to the set up menu? > > Many thanks - Tim. > VK3MIT > > * * * > > [**Visit Topic**](https://community.allstarlink.org/t/first-log-in-to-pi/17005/5) or reply to this email to respond. > > You are receiving this because you enabled mailing list mode. > > To unsubscribe from these emails, [**click here**](https://community.allstarlink.org/email/unsubscribe/8105df534e88b480bf7acc7f6c60ecab44b51f75027892612c5340288f68d503).