# Failed to start load kernel modules FIXED!

**URL:** <https://community.allstarlink.org/t/failed-to-start-load-kernel-modules-fixed/19227>\
**Category:** AllStarLink\
**Created:** [March 3, 2022, 1:17am UTC](https://community.allstarlink.org/t/failed-to-start-load-kernel-modules-fixed/19227 "2022-03-03T01:17:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [March 3, 2022, 1:17am UTC](https://community.allstarlink.org/t/failed-to-start-load-kernel-modules-fixed/19227/1 "2022-03-03T01:17:01Z")

</div>

Noticed this Failed flag on boot of the laptop. Doesn’t seem to affect anything but…  
Any ideas?

Failed to start load kernel modules

See systemctl status systend-modules-load.service

Process 187

Main PID: 187

Unit service.service could not be found.

 ![image](https://community.allstarlink.org/uploads/default/original/2X/a/a0a7cc35b41c85c2cbb6246b0ced8a43a2562a28.jpeg)

---

<div class="post-metadata">

**Author:** ![K7iou1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a587f6/32.png) [@K7iou1](https://community.allstarlink.org/u/K7iou1)\
**Post date:** [March 3, 2022, 3:23am UTC](https://community.allstarlink.org/t/failed-to-start-load-kernel-modules-fixed/19227/2 "2022-03-03T03:23:25Z")

</div>

So I found this and did it. Fixed it but I’m unsure if it was correct for my laptop? Removed a bunch of startup files? Instead of a full screen I now only get 1/4 screen of start up files.  
Dell laptop Pentium 2. Error is gone and I can run CLI but when I first start it, error on password, is incorrect for Allstar. BUT I check node settings, correct and save then start CLI and no password error. 🤔

 ![image](https://community.allstarlink.org/uploads/default/original/2X/c/c523b3e7b5b5504b62a9d88fccf6fed71cf6fb2e.jpeg)