# Disconnect all with DTMF?

**URL:** <https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446>\
**Category:** Archive\
**Created:** [December 8, 2024, 5:50am UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446 "2024-12-08T05:50:16Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Smalltalk](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/s/f17d59/32.png) [@Smalltalk](https://community.allstarlink.org/u/Smalltalk)\
**Post date:** [December 8, 2024, 5:50am UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446/1 "2024-12-08T05:50:16Z")

</div>

Allmon3 has a feature to disconnect all nodes at once. I’d like to do this with DTMF. Can this be done?

de Steve N6VL

---

<div class="post-metadata">

**Author:** ![N2DYI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n2dyi/32/1712_2.png) [@N2DYI](https://community.allstarlink.org/u/N2DYI)\
**Post date:** [December 8, 2024, 7:59am UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446/2 "2024-12-08T07:59:17Z")

</div>

Yes, but not by default.  
in rpt.conf, under the functions stanza, are a bunch of codes starting with 8. One of those, \*806, maps to ilink,6, which disconnects all links.  
This is commented out, as well as all the 9’s that reference cop commands, presumably to avoid drive-by DTMFers dropping all links on a repeater and doing unwanted things to your node(s), such as issuing cop,4 to blast a 1k tone to all connected nodes for 8 hours straight… Nope, that didn’t happen to me recently or anything…  
You can uncomment this line and/or change it to something else that isn’t in use, then reload app\_rpt or restart Asterisk to make it go live.  
The default line is:

; 806 = ilink,6 ; Disconnect all links

---

<div class="post-metadata">

**Author:** ![Smalltalk](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/s/f17d59/32.png) [@Smalltalk](https://community.allstarlink.org/u/Smalltalk)\
**Post date:** [December 8, 2024, 11:07pm UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446/3 "2024-12-08T23:07:08Z")

</div>

@N2DYI  
Yes it works great!!!

But I expected a verification in telemetry. Maybe I’m too picky? But it does get the job done.

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [December 8, 2024, 11:36pm UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446/4 "2024-12-08T23:36:16Z")

</div>

You should get a double beep for acknowledgement of a successful command.  
But no Allison feedback like some functions.

---

<div class="post-metadata">

**Author:** ![system](https://community.allstarlink.org/uploads/default/original/2X/4/42700284e201b031bd667c3f63bbae05a74b3104.png) [@system](https://community.allstarlink.org/u/system)\
**Post date:** [December 11, 2024, 11:36pm UTC](https://community.allstarlink.org/t/disconnect-all-with-dtmf/22446/5 "2024-12-11T23:36:20Z")

</div>

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.