# DIAL RPI2 **URL:** \ **Category:** AllStarLink\ **Created:** [December 4, 2015, 9:13pm UTC](https://community.allstarlink.org/t/dial-rpi2/12349 "2015-12-04T21:13:45Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![N1xbm](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/8797f3/32.png) [@N1xbm](https://community.allstarlink.org/u/N1xbm)\ **Post date:** [December 4, 2015, 9:13pm UTC](https://community.allstarlink.org/t/dial-rpi2/12349/1 "2015-12-04T21:13:45Z")
I noticed astres.sh does not work on the computer mentioned in my subject line. How do I restart asterisk. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086 ---
**Author:** ![N5zua](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/ac91a4/32.png) [@N5zua](https://community.allstarlink.org/u/N5zua)\ **Post date:** [December 4, 2015, 9:38pm UTC](https://community.allstarlink.org/t/dial-rpi2/12349/2 "2015-12-04T21:38:30Z")
` Perhaps you don’t have that shell script. From inside the CLI try ``` > restart now `and see if that works. N5ZUA ``` > **···** > > On 12/4/2015 3:13 PM, Robert Newberry > wrote: > > > ``` > > I noticed astres.sh does not work on the computer > > > > ``` > > > > mentioned in my subject line. How do I restart asterisk. > > > N1XBM > > > > ``` > > Apparare Scientor > > > > Paratus Communicare > > > > Allstar Node # 27086, 41540, 41812, 42086 > > > > ��� > > > > ``` > > > ```auto > > > > _______________________________________________ > > App_rpt-users mailing list > > To unsubscribe from this list please visit and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > ``` > > [App\_rpt-users@ohnosec.org](mailto:App_rpt-users@ohnosec.org)[http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users)[http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) ---
**Author:** ![Bryan\_D\_Boyle](https://community.allstarlink.org/user_avatar/community.allstarlink.org/bryan_d_boyle/32/22_2.png) [@Bryan\_D\_Boyle](https://community.allstarlink.org/u/Bryan_D_Boyle)\ **Post date:** [December 4, 2015, 10:01pm UTC](https://community.allstarlink.org/t/dial-rpi2/12349/3 "2015-12-04T22:01:43Z")
or “service asterisk restart” a couple of times. > **···** > > or “ps -eal | grep asterisk”, note the PID #, then “kill -HUP (the pid #)” > > lots of ways to restart. > > – > Bryan > > Sent from my iPhone 6S…No electrons were harmed in the sending of this message. > > On Dec 4, 2015, at 16:38, Steve Agee [n5zua@earthlink.net](mailto:n5zua@earthlink.net) wrote: > > > ` Perhaps you don’t have that shell script. From inside the CLI try > > > > ``` > > CLI> restart now > > > > `and see if that works. > > > > N5ZUA > > > > On 12/4/2015 3:13 PM, Robert Newberry > > > > ``` > > > > wrote: > > > > ``` > > > I noticed astres.sh does not work on the computer > > > > > > ``` > > > > > > mentioned in my subject line. How do I restart asterisk. > > > > N1XBM > > > > > > ``` > > > Apparare Scientor > > > > > > Paratus Communicare > > > > > > Allstar Node # 27086, 41540, 41812, 42086 > > > > > > ``` > > > > ```auto > > > _______________________________________________ > > > App_rpt-users mailing list > > > App_rpt-users@ohnosec.org > > > [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) > > > > > > To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > > > ``` > > > * * * > > > > App\_rpt-users mailing list > > [App\_rpt-users@ohnosec.org](mailto:App_rpt-users@ohnosec.org) > > [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) > > > > To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button” > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ---
**Author:** ![k0jsc](https://community.allstarlink.org/user_avatar/community.allstarlink.org/k0jsc/32/1022_2.png) [@k0jsc](https://community.allstarlink.org/u/k0jsc)\ **Post date:** [December 16, 2015, 3:57pm UTC](https://community.allstarlink.org/t/dial-rpi2/12349/4 "2015-12-16T15:57:42Z")
“restart now” from the cli works just fine. Thaks Bryan! > **···** > > On Fri, Dec 4, 2015 at 3:01 PM, Bryan D. Boyle [bdboyle@bdboyle.com](mailto:bdboyle@bdboyle.com) wrote: > > > or “service asterisk restart” a couple of times. > > > > > > or “ps -eal | grep asterisk”, note the PID #, then “kill -HUP (the pid #)” > > > > > > lots of ways to restart. > > > > – > > Bryan > > > Sent from my iPhone 6S…No electrons were harmed in the sending of this message. > > > > > > On Dec 4, 2015, at 16:38, Steve Agee [n5zua@earthlink.net](mailto:n5zua@earthlink.net) wrote: > > > > ` Perhaps you don’t have that shell script. From inside the CLI try > > > > > > ``` > > > CLI> restart now > > > > > > `and see if that works. > > > > > > N5ZUA > > > > > > On 12/4/2015 3:13 PM, Robert Newberry > > > > > > ``` > > > > > > wrote: > > > > > ``` > > > > I noticed astres.sh does not work on the computer > > > > > > > > ``` > > > > > > > > mentioned in my subject line. How do I restart asterisk. > > > > > N1XBM > > > > > > > > ``` > > > > Apparare Scientor > > > > > > > > Paratus Communicare > > > > > > > > Allstar Node # 27086, 41540, 41812, 42086 > > > > > > > > ``` > > > > > ```auto > > > > _______________________________________________ > > > > App_rpt-users mailing list > > > > App_rpt-users@ohnosec.org > > > > [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) > > > > > > > > To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > > > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > > > > > ``` > > > > * * * > > > > > > App\_rpt-users mailing list > > > [App\_rpt-users@ohnosec.org](mailto:App_rpt-users@ohnosec.org) > > > [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) > > > > > > To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button” > > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > * * * > > > > App\_rpt-users mailing list > > > > [App\_rpt-users@ohnosec.org](mailto:App_rpt-users@ohnosec.org) > > > > [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) > > > > To unsubscribe from this list please visit [http://ohnosec.org/cgi-bin/mailman/listinfo/app\_rpt-users](http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button” > > > > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.