# DIAL Raspberry Pi 2 Delay

**URL:** <https://community.allstarlink.org/t/dial-raspberry-pi-2-delay/12595>\
**Category:** AllStarLink\
**Created:** [April 8, 2016, 10:55pm UTC](https://community.allstarlink.org/t/dial-raspberry-pi-2-delay/12595 "2016-04-08T22:55:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Szingman2](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/s/49beb7/32.png) [@Szingman2](https://community.allstarlink.org/u/Szingman2)\
**Post date:** [April 8, 2016, 10:55pm UTC](https://community.allstarlink.org/t/dial-raspberry-pi-2-delay/12595/1 "2016-04-08T22:55:03Z")

</div>

Matt,

The 3 is supported check the download link.

73, Steve N4IRS

> **···**
>
> On Fri, Apr 8, 2016 at 11:16 AM, Kevin Custer [kuggie@kuggie.com](mailto:kuggie@kuggie.com) wrote:
> 
> > 3 radios on one Raspberry Pi 2? I guess my next question would be why?
> > 
> > If you are running SimpleUSB now, switching to USBradio will likely make the situation worse as there is generally more DSP going on in USBradio than SimpleUSB - depending on exact configuration.
> > 
> > Raspberry Pi’s are inexpensive as compared to some PC’s which could have enough horsepower to properly operate 3 or 4 radio interfaces, even in full DSP. If you really want to run multiple radio adapters on a single appliance, consider choosing a hardware platform powerful enough to do it properly.
> > 
> > Kevin
> > 
> > On 4/8/2016 9:52 AM, Matt Brennan wrote:
> > 
> > > Sorry - 3. 3 separate simplex radios.
> > > 
> > > Someone else individually replied to me and said it’s likely an issue with SimpleUSB and I should try using usbradio instead. I will be trying that tomorrow, but still open to other suggestions.
> > > 
> > > Thanks again,
> > > 
> > > Matt, NM1B

---

<div class="post-metadata">

**Author:** ![n6gkj](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/ecae2f/32.png) [@n6gkj](https://community.allstarlink.org/u/n6gkj)\
**Post date:** [April 9, 2016, 3:22am UTC](https://community.allstarlink.org/t/dial-raspberry-pi-2-delay/12595/2 "2016-04-09T03:22:04Z")

</div>

Hi guys,

Take a look at how the RasPi operates.

You have USB2 ports on a USB2 hub. There is only so much data you can push across that bridge. RasPi weak link is the USB2. I am not going to rewrite all the work done by the many masses.

I have a similar arrangement, however I use a RasPi for each radio, a small Netgear SW and put in linking shortcuts.

This method ALWAYS works… It does not add that much cost or footprint.

I have a small compact system in a 50cal ammo can

Especially when there is the will there is a way

Ron,

N6GKJ

[http://n6gkj.lodiarc.org](http://n6gkj.lodiarc.org)

> **···**
>
> On Fri, Apr 8, 2016 at 11:16 AM, Kevin Custer [kuggie@kuggie.com](mailto:kuggie@kuggie.com) wrote:
> 
> > 3 radios on one Raspberry Pi 2? I guess my next question would be why?
> > 
> > If you are running SimpleUSB now, switching to USBradio will likely make the situation worse as there is generally more DSP going on in USBradio than SimpleUSB - depending on exact configuration.
> > 
> > Raspberry Pi’s are inexpensive as compared to some PC’s which could have enough horsepower to properly operate 3 or 4 radio interfaces, even in full DSP. If you really want to run multiple radio adapters on a single appliance, consider choosing a hardware platform powerful enough to do it properly.
> > 
> > Kevin
> > 
> > On 4/8/2016 9:52 AM, Matt Brennan wrote:
> > 
> > > Sorry - 3. 3 separate simplex radios.
> > > 
> > > Someone else individually replied to me and said it’s likely an issue with SimpleUSB and I should try using usbradio instead. I will be trying that tomorrow, but still open to other suggestions.
> > > 
> > > Thanks again,
> > > 
> > > Matt, NM1B
