# Debian Bullseye Packages and install

**URL:** <https://community.allstarlink.org/t/debian-bullseye-packages-and-install/19399>\
**Category:** Archive\
**Tags:** development\
**Created:** [June 6, 2022, 2:43pm UTC](https://community.allstarlink.org/t/debian-bullseye-packages-and-install/19399 "2022-06-06T14:43:04Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![NR9V](https://community.allstarlink.org/user_avatar/community.allstarlink.org/nr9v/32/2195_2.png) [@NR9V](https://community.allstarlink.org/u/NR9V)\
**Post date:** [June 12, 2023, 6:55am UTC](https://community.allstarlink.org/t/debian-bullseye-packages-and-install/19399/19 "2023-06-12T06:55:03Z")

</div>

ASL is now working on my ($50) netbook with Debian 11! Everything is working great, installed Supermon and AllScan, now monitoring a net on the Keller Peak repeater, with an ANR100 Radio-less node plugged into the netbook.

As alluded to above this was not easy to do but for anyone else who wants to do it, this is basically what I did:

- Install Debian 11
- Follow steps on ASL github page to compile latest ASL from source
- There is an error during ./configure but if you google the error message there’s an easy fix
- Do the make and make install. They complete fine but don’t actually install ASL.
- Review all the posts above, and run the commands in AD8JL’s most recent post above. You may also need to run `sudo apt install dahdi-dkms` again as suggested in above post.
- Run commands in N5UD’s solution in [Beta2rel6 multiple problems WYSE 3040 - #6 by kk6rq](https://community.allstarlink.org/t/beta2rel6-multiple-problems-wyse-3040/20182/6)

You can now run asl-menu and everything went smoothly for me from there.

 ![deb11](https://community.allstarlink.org/uploads/default/original/2X/2/284ea8fe2be095dac56a6f96982b9d94aeb9815a.jpeg)

Thanks for everyone’s input on this.

---

_[View the full topic](https://community.allstarlink.org/t/debian-bullseye-packages-and-install/19399)._