# Could not log into Asterisk Manager **URL:** \ **Category:** AllStarLink\ **Created:** [June 18, 2020, 5:55pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158 "2020-06-18T17:55:39Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![K6JV](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/bbe5ce/32.png) [@K6JV](https://community.allstarlink.org/u/K6JV)\ **Post date:** [June 18, 2020, 5:55pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/1 "2020-06-18T17:55:39Z")
Router crashed and we reinstalled node changed local IP address. Now get the unable to log into Asterisk Manager message. I have forwarded all the appropriate ports to the new IP Address ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [June 18, 2020, 6:26pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/2 "2020-06-18T18:26:21Z")
Sounds like your router crashed so you reinstalled your node… is that right? In any case, reinstalling your node will require editing manager.conf to configure the password, etc… did you do that? ---
**Author:** ![K6JV](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/bbe5ce/32.png) [@K6JV](https://community.allstarlink.org/u/K6JV)\ **Post date:** [June 18, 2020, 6:43pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/3 "2020-06-18T18:43:07Z")
Yes, I did edit the manager.conf file and I can log into Supermon. Supermon cannot log into the asterisk manager. ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [June 18, 2020, 6:49pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/4 "2020-06-18T18:49:13Z")
Manager.conf must match the settings in allmon.inc.php in order for Allmon to login in to Asterisk. I don’t run Supermon but I assume the same applies. HamVoIP folks get on here occasionally, maybe they will confirm and/or help. ---
**Author:** ![K6JV](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/bbe5ce/32.png) [@K6JV](https://community.allstarlink.org/u/K6JV)\ **Post date:** [June 18, 2020, 7:04pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/5 "2020-06-18T19:04:17Z")
Thanks, yes the settings are the same in both files ---
**Author:** ![larry](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/l/47e85d/32.png) [@larry](https://community.allstarlink.org/u/larry)\ **Post date:** [June 18, 2020, 7:37pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/6 "2020-06-18T19:37:14Z")
You did remember to verify the bindaddress as well as the port number used in manager.conf? Making sure they match your allmon.ini file for each node you want to log into? Also Depending on your Port Forward and how NAT works for your system… If your Supermon/Allmon is running on a different server on a LAN than the node you are trying to log into you may need to add/edit each IP to the opposite node’s [Node] section. All things to check out. Larry - N7FM > **···** > > On 6/18/20 12:14 PM, Doug Bornstein via AllStarLink Discussion Groups wrote: > > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Thanks, yes the settings are the same in both files > > > > * * * > > > > Visit Topic > > [https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/5](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/5) > > or reply to this email to respond. > > > > * * * > > > > ``` > > In Reply To > > > > ``` > > > > [wd6awp] wd6awp [https://community.allstarlink.org/u/wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin > > June 18 > > > > Manager.conf must match the settings in allmon.inc.php in order for > > Allmon to login in to Asterisk. I don’t run Supermon but I assume the > > same applies. HamVoIP folks get on here occasionally, maybe they will > > confirm and/or help. > > > > ``` > > Previous Replies > > > > ``` > > > > [wd6awp] wd6awp [https://community.allstarlink.org/u/wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin > > June 18 > > > > Manager.conf must match the settings in allmon.inc.php in order for > > Allmon to login in to Asterisk. I don’t run Supermon but I assume the > > same applies. HamVoIP folks get on here occasionally, maybe they will > > confirm and/or help. > > > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Yes, I did edit the manager.conf file and I can log into Supermon. > > Supermon cannot log into the asterisk manager. > > > > [wd6awp] wd6awp [https://community.allstarlink.org/u/wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin > > June 18 > > > > Sounds like your router crashed so you reinstalled your node… is that > > right? In any case, reinstalling your node will require editing > > manager.conf to configure the password, etc… did you do that? > > > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Router crashed and we reinstalled node changed local IP address. Now get > > the unable to log into Asterisk Manager message. I have forwarded all > > the appropriate ports to the new IP Address > > > > * * * > > > > Visit Topic > > [https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/5](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/5) > > or reply to this email to respond. > > > > You are receiving this because you enabled mailing list mode. > > > > To unsubscribe from these emails, click here > > [https://community.allstarlink.org/email/unsubscribe/833c4e24a7423d51c0ce2981f6786b1f1aef64c5fbc1f5f32d1ec2797b55f3b5](https://community.allstarlink.org/email/unsubscribe/833c4e24a7423d51c0ce2981f6786b1f1aef64c5fbc1f5f32d1ec2797b55f3b5). ---
**Author:** ![K6JV](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/bbe5ce/32.png) [@K6JV](https://community.allstarlink.org/u/K6JV)\ **Post date:** [June 18, 2020, 9:12pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/7 "2020-06-18T21:12:33Z")
Thanks Larry, is the bindadress the 127.0.0.0? The port number shows as 5038. I am trying to run this from the same IP as the node. ---
**Author:** ![larry](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/l/47e85d/32.png) [@larry](https://community.allstarlink.org/u/larry)\ **Post date:** [June 18, 2020, 10:02pm UTC](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/8 "2020-06-18T22:02:53Z")
Doug, In that case it should work if all that matches. You have created the .htaccess login for the web browser Yes? If not you won’t be able to login Larry - N7FM > **···** > > On 6/18/20 2:22 PM, Doug Bornstein via AllStarLink Discussion Groups wrote: > > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Thanks Larry, is the bindadress the 127.0.0.0? The port number shows as > > 5038. I am trying to run this from the same IP as the node. > > > > * * * > > > > Visit Topic > > [https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/7](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/7) > > or reply to this email to respond. > > > > * * * > > > > ``` > > Previous Replies > > > > ``` > > > > [larry] larry [https://community.allstarlink.org/u/larry](https://community.allstarlink.org/u/larry) > > June 18 > > > > You did remember to verify the bindaddress as well as the port number > > used in manager.conf? > > > > Making sure they match your allmon.ini file for each node you want to > > log into? > > > > Also Depending on your Port Forward and how NAT works for your system… > > > > If your Supermon/Allmon is running on a different server on a LAN than > > the node you are trying to log into you may need to add/edit each IP to > > the opposite node’s [Node] section. > > > > All things to check out. > > > > Larry - N7FM > > > > ··· (click for more details) > > [https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/6](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/6) > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Thanks, yes the settings are the same in both files > > > > [wd6awp] wd6awp [https://community.allstarlink.org/u/wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin > > June 18 > > > > Manager.conf must match the settings in allmon.inc.php in order for > > Allmon to login in to Asterisk. I don’t run Supermon but I assume the > > same applies. HamVoIP folks get on here occasionally, maybe they will > > confirm and/or help. > > > > [K6JV] K6JV [https://community.allstarlink.org/u/k6jv](https://community.allstarlink.org/u/k6jv) > > June 18 > > > > Yes, I did edit the manager.conf file and I can log into Supermon. > > Supermon cannot log into the asterisk manager. > > > > [wd6awp] wd6awp [https://community.allstarlink.org/u/wd6awp](https://community.allstarlink.org/u/wd6awp) ASL Admin > > June 18 > > > > Sounds like your router crashed so you reinstalled your node… is that > > right? In any case, reinstalling your node will require editing > > manager.conf to configure the password, etc… did you do that? > > > > * * * > > > > Visit Topic > > [https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/7](https://community.allstarlink.org/t/could-not-log-into-asterisk-manager/17158/7) > > or reply to this email to respond. > > > > You are receiving this because you enabled mailing list mode. > > > > To unsubscribe from these emails, click here > > [https://community.allstarlink.org/email/unsubscribe/146b637ab8bed6658c6ab653143585b553c560610c39a963734b8aa9f097a6aa](https://community.allstarlink.org/email/unsubscribe/146b637ab8bed6658c6ab653143585b553c560610c39a963734b8aa9f097a6aa).