# Command "rpt playback" doesn't send to all connected nodes

**URL:** <https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631>\
**Category:** AllStarLink\
**Created:** [May 24, 2021, 12:32am UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631 "2021-05-24T00:32:41Z")\
**Posts on this page:** 6\
**Page:** 2

<div class="post-metadata">

**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\
**Post date:** [May 26, 2021, 11:23pm UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/21 "2021-05-26T23:23:21Z")

</div>

Didn’t you say you were running this command from your hub? There’s not a radio there, right?

---

<div class="post-metadata">

**Author:** ![KenHorse](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/fbc32d/32.png) [@KenHorse](https://community.allstarlink.org/u/KenHorse)\
**Post date:** [May 26, 2021, 11:24pm UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/22 "2021-05-26T23:24:14Z")

</div>

Yes, from my hub but there is also a radio connected to it (temporarily) as one of my repeaters doesn’t have MESH yet and it still depends on an RF link

---

<div class="post-metadata">

**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\
**Post date:** [May 26, 2021, 11:29pm UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/23 "2021-05-26T23:29:01Z")

</div>

You could create another node with no radio and well… you get it. But you’re happy with your ssh solution. And I’m happy knowing that duplex 0 was the issue, like I said in the beginning. 🙂

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [May 27, 2021, 3:00am UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/24 "2021-05-27T03:00:09Z")

</div>

If I were reading better…  
I would have noticed du[lex=0 and no telemetry means no telemetry as I said that…  
LOL

---

<div class="post-metadata">

**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\
**Post date:** [May 27, 2021, 1:32pm UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/25 "2021-05-27T13:32:04Z")

</div>

> [@Mike](#):
>
> no telemetry means no telemetry

Yes you said that, you The Man!

---

<div class="post-metadata">

**Author:** ![system](https://community.allstarlink.org/uploads/default/original/2X/4/42700284e201b031bd667c3f63bbae05a74b3104.png) [@system](https://community.allstarlink.org/u/system)\
**Post date:** [May 30, 2021, 1:32pm UTC](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631/26 "2021-05-30T13:32:54Z")

</div>

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.

[Previous page](https://community.allstarlink.org/t/command-rpt-playback-doesnt-send-to-all-connected-nodes/18631.md?page=1)