# Command error, undefined

**URL:** <https://community.allstarlink.org/t/command-error-undefined/23298>\
**Category:** AllStarLink\
**Created:** [May 22, 2025, 2:02pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298 "2025-05-22T14:02:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![NE4W](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ne4w/32/4036_2.png) [@NE4W](https://community.allstarlink.org/u/NE4W)\
**Post date:** [May 22, 2025, 2:02pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298/1 "2025-05-22T14:02:33Z")

</div>

![Screenshot 2025-05-22 at 09.45.16](https://community.allstarlink.org/uploads/default/original/2X/4/4e6f036ba042e3b08fbeafa9aba7b9df646e9275.png)  
Setup: I have ASL running on a Wyse 3040 (Debian) and a UCI120 node. I can connect to other nodes using DTMF commands, and by using the asterisk command line. Now the problem with Allmon3...  
I can log into allmon3 with no problem. Anything I try to do as far as linking, showing node status, etc. is met with the error "undefined."

My allmon3.ini file contains this:  
; For a basic installation, you should be able to uncomment the below,  
; change 1999 to your node number and set the pass= as  
; set in asterisk/manager.conf  
[65192]  
host=192.168.1.103  
user=admin  
pass=mypass

I am not seeing any password in asterisk/manager.conf. Is the password supposed to be the Allstar node password (from my Allstar account)?

---

<div class="post-metadata">

**Author:** ![WA3WCO](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wa3wco/32/3123_2.png) [@WA3WCO](https://community.allstarlink.org/u/WA3WCO)\
**Post date:** [May 22, 2025, 2:55pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298/2 "2025-05-22T14:55:12Z")

</div>

> [@NE4W](#):
>
> I am not seeing any password in asterisk/manager.conf. Is the password supposed to be the Allstar node password (from my Allstar account)?

Your `/etc/asterisk/manager.conf` should have a stanza with :

```auto
...
[admin]
secret = <ami-password>
...

```

The "pass=" in the allmon3.ini file should match this "secret=".

---

<div class="post-metadata">

**Author:** ![NE4W](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ne4w/32/4036_2.png) [@NE4W](https://community.allstarlink.org/u/NE4W)\
**Post date:** [May 22, 2025, 4:12pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298/3 "2025-05-22T16:12:00Z")

</div>

Yes, you're correct. I was looking at a different config file.

The passwords do match.

So it must be another cause. I did try another browser and got the same error.

---

<div class="post-metadata">

**Author:** ![NE4W](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ne4w/32/4036_2.png) [@NE4W](https://community.allstarlink.org/u/NE4W)\
**Post date:** [May 22, 2025, 6:55pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298/4 "2025-05-22T18:55:50Z")

</div>

I changed the the host information from my lan IP address to 127.0.0.1 and restarted the Allmon service. All working now.

---

<div class="post-metadata">

**Author:** ![system](https://community.allstarlink.org/uploads/default/original/2X/4/42700284e201b031bd667c3f63bbae05a74b3104.png) [@system](https://community.allstarlink.org/u/system)\
**Post date:** [May 25, 2025, 6:56pm UTC](https://community.allstarlink.org/t/command-error-undefined/23298/5 "2025-05-25T18:56:14Z")

</div>

This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.