CDM1250 as a steerable remote base

App_rpt-users
2

Ron,

Give the two attached example files a look.

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531

···

On 9/18/2020 10:49 PM, Ron via AllStarLink Discussion Groups wrote:

[n6gkj] n6gkj https://community.allstarlink.org/u/n6gkj
September 19

Guys,

i know I have seen this before, but I cannot find the information I need.
I want to us a Moto CDM1250 as a steerable remote base using the GPIO pins on a URI.

I know it can be done but I dont see that option in the current ASL Build (not running Hamvoip) The CDM, Maxtrac and Radiius
radios all have the abillity to do channel selecting via 5 input lines on the 16 pin connector.
Can someone help me and point me in the right direction?

Thanks,

Ron, N6GKJ

Visit Topic https://community.allstarlink.org/t/cdm1250-as-a-steerable-remote-base/17571/1 or reply to this email to respond.

You are receiving this because you enabled mailing list mode.

To unsubscribe from these emails, click here
https://community.allstarlink.org/email/unsubscribe/c24987c042025e26feb18a00aba0fac89582e137c3be33dfec4ca02789aea8b7.

(Attachment rpt.conf.txt is missing)

(Attachment simpleUSB.conf.txt is missing)