# Can't login, node links on dashboard

**URL:** <https://community.allstarlink.org/t/cant-login-node-links-on-dashboard/24766>\
**Category:** AllStarLink\
**Tags:** allmon3\
**Created:** [July 19, 2026, 4:08pm UTC](https://community.allstarlink.org/t/cant-login-node-links-on-dashboard/24766 "2026-07-19T16:08:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![drt-rcr1](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/d/35a633/32.png) [@drt-rcr1](https://community.allstarlink.org/u/drt-rcr1)\
**Post date:** [July 19, 2026, 4:08pm UTC](https://community.allstarlink.org/t/cant-login-node-links-on-dashboard/24766/1 "2026-07-19T16:08:08Z")

</div>

I'll admit to not taking good notes as I progressed and I'm not much of a manual reader. I spent much of yesterday building a Shari Pi5 node and trying to configure it by following along with a couple videos. I believe I have it completed as I can use my HT and log in to the parrot node (55553) and it all works as expected. I figured out how to do the DTMF tones to do this as I can't get logged into the Allmon3 dashboard Node Links section so I can do commands from there. It wants a username and password that I don't recall setting up. I found that the default login is allmon3 and password but that doesn't work. I tried my username and password to access Web Admin Portal but that doesn't work either. I'm not finding a place to reset this password on the login page. I tried the username for my node and the password that Allstar generated and that isn't it. Most of the usernames and passwords I created yesterday were automatically saved by my pc but not this one.

I'm lost! How do I figure this out?

Thanks, Matt

NE9D

UPDATE!!!!

Last evening, I was following Grayman POTA's video. Towards the end of his video he showed how to reset the password. I tried to do this but it came back with an error when I tried to delete it. Apparently it still deleted it. I went back in and redid the password reset like he showed and this time it all worked just like it did for him. Using the new password I reset to got me in and I can now use all the node commands in the Node Link menu!

Sorry for the post as I figured it out myself. Wasn't sure if I should just delete the entire post or let it be part of the searchable history and maybe help someone else out.

---

<div class="post-metadata">

**Author:** ![K8UPE](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/46a35a/32.png) [@K8UPE](https://community.allstarlink.org/u/K8UPE)\
**Post date:** [July 20, 2026, 4:10am UTC](https://community.allstarlink.org/t/cant-login-node-links-on-dashboard/24766/2 "2026-07-20T04:10:29Z")

</div>

Thats ok. Sometimes you got to do something different to find this issue or in this case right it out to find it. Allmon3 is great but I recommend you check out Allscan or Yaamon. It's basiclly another type of dashboard for ASL3.

---

<div class="post-metadata">

**Author:** ![KB3CS](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kb3cs/32/4730_2.png) [@KB3CS](https://community.allstarlink.org/u/KB3CS)\
**Post date:** [July 20, 2026, 12:43pm UTC](https://community.allstarlink.org/t/cant-login-node-links-on-dashboard/24766/3 "2026-07-20T12:43:00Z")

</div>

setting up allmon3 is covered in the AllStarLink Manual.  
there is little to do other than create a user and password just for allmon3, especially if you use the ASL3 Appliance image.  
details are found in [User Management - AllStarLink Manual](https://allstarlink.github.io/allmon3/usermgmt/)