# Build fails on v 0.219

**URL:** <https://community.allstarlink.org/t/build-fails-on-v-0-219/8168>\
**Category:** AllStarLink\
**Created:** [March 23, 2010, 4:57pm UTC](https://community.allstarlink.org/t/build-fails-on-v-0-219/8168 "2010-03-23T16:57:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Telesistant](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/t/a87d85/32.png) [@Telesistant](https://community.allstarlink.org/u/Telesistant)\
**Post date:** [March 23, 2010, 4:57pm UTC](https://community.allstarlink.org/t/build-fails-on-v-0-219/8168/1 "2010-03-23T16:57:03Z")

</div>

Since Im going to have to make a 0.220 release to fix this  
(its not even a flesh wound 🙂 ), can any one provide me with  
any useful information about the MDC-1200 commands to that I can  
make this a non-trivial release???

JIM WB6NIL

> **···**
>
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_
> 
> > Date: Tue, 23 Mar 2010 09:09:26 -0700  
> > Subject: Build fails on v 0.219  
> > From: hkwilliamson@gmail.com  
> > To: telesistant@hotmail.com
> > 
> > Hi Jim,
> > 
> > The build of v.0.219 fails during the compile of app\_rpt.c due to #include of missing mdc\_decode.c. It's apparently an include path issue that I didn't take the time to figure out, instead opting to copy mdc\_decode.[ch] files into the app subdir. The make worked fine then but obviously there is a correct fix for this.
> > 
> > Regards,
> > 
> > Keith  
> > KF7DRV  
> > Allstar: 2541

---

<div class="post-metadata">

**Author:** ![Kt9ac](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/a4c791/32.png) [@Kt9ac](https://community.allstarlink.org/u/Kt9ac)\
**Post date:** [March 24, 2010, 1:23am UTC](https://community.allstarlink.org/t/build-fails-on-v-0-219/8168/2 "2010-03-24T01:23:47Z")

</div>

Just an update...

I was originally trying the ACID downloaded version to compile in the MDC1200 code, and was getting the same failure. Did a SVN download of the current 'astsrc-1.4.23-pre' and moved the mdc\_decode.[ch] files into /usr/src/asterisk/apps and it all compiled!

I'll try some config samples and see what I get for outputs.

Thanks to everyone for getting this going so quickly!

Tony

Jim Duuuude wrote:

> **···**
>
> > Since Im going to have to make a 0.220 release to fix this  
> > (its not even a flesh wound 🙂 ), can any one provide me with  
> > any useful information about the MDC-1200 commands to that I can  
> > make this a non-trivial release???
> > 
> > JIM WB6NIL
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > &nbsp;&nbsp;
> > 
> > > Date: Tue, 23 Mar 2010 09:09:26 -0700  
> > > Subject: Build fails on v 0.219  
> > > From: hkwilliamson@gmail.com  
> > > To: telesistant@hotmail.com
> > > 
> > > Hi Jim,
> > > 
> > > The build of v.0.219 fails during the compile of app\_rpt.c due to #include of missing mdc\_decode.c. It's apparently an include path issue that I didn't take the time to figure out, instead opting to copy mdc\_decode.[ch] files into the app subdir. The make worked fine then but obviously there is a correct fix for this.
> > > 
> > > Regards,
> > > 
> > > Keith  
> > > KF7DRV  
> > > Allstar: 2541
> > 
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > App\_rpt-users mailing list  
> > App\_rpt-users@qrvc.com  
> > [http://qrvc.com/mailman/listinfo/app\_rpt-users](http://qrvc.com/mailman/listinfo/app_rpt-users)