# Beta 6 Echolink Issue **URL:** \ **Category:** AllStarLink\ **Created:** [April 29, 2021, 11:00am UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548 "2021-04-29T11:00:12Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Scott](https://community.allstarlink.org/user_avatar/community.allstarlink.org/scott/32/1484_2.png) [@Scott](https://community.allstarlink.org/u/Scott)\ **Post date:** [April 29, 2021, 11:00am UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/1 "2021-04-29T11:00:13Z")
When I attempt to connect to _some_ Echolink nodes or conference servers, they show up on the Supermon connected stations list with a red background and yellow text as it tries to connect. After 3-5 seconds it disappears from the list (does not connect). On the old ASL node where my -L Echolink node was configured, there were no connection issues. What should I check to see if this is a bug or some other type of issue? Thanks! ---
**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\ **Post date:** [April 30, 2021, 12:55am UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/2 "2021-04-30T00:55:30Z")
I doubt this is a beta issue but could be… I think this is standard config and conectivity at play. Are you using the same config file as the older… user/pass set-up correct. Do you have more than one echolink server logged-in from the same NAT/IP and would include your phone app on wifi ? ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [April 30, 2021, 2:56am UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/3 "2021-04-30T02:56:26Z")
What happens if you go to the asterisk CLI and type `echolink dbdump`? Do you get a list of stations? ---
**Author:** ![KJ7OMO](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kj7omo/32/3331_2.png) [@KJ7OMO](https://community.allstarlink.org/u/KJ7OMO)\ **Post date:** [April 30, 2021, 9:31am UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/4 "2021-04-30T09:31:22Z")
Did you forward all echolink ports to the node? Be sure ports 5198, 5199, and 5200 are forwarded. Also, be sure there is no multiple echolink connections on the same network, only one at a time can go through, unless you make the other connections go through proxy servers. ---
**Author:** ![N8PC](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/f04885/32.png) [@N8PC](https://community.allstarlink.org/u/N8PC)\ **Post date:** [May 1, 2021, 12:11pm UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/5 "2021-05-01T12:11:19Z")
upgrade to Supermon2 v1.02 and higher. solves a lot of problems ---
**Author:** ![Scott](https://community.allstarlink.org/user_avatar/community.allstarlink.org/scott/32/1484_2.png) [@Scott](https://community.allstarlink.org/u/Scott)\ **Post date:** [May 1, 2021, 12:36pm UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/6 "2021-05-01T12:36:38Z")
Yes Tim, I do get a list of stations. KJ7OMO - Yes, the firewall is open for those ports. Brad - N8PC - I do not believe that Supermon2 is available for x86 systems yet. I think it is still Ras Pi only. ---
**Author:** ![WD6AWP](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wd6awp/32/5_2.png) [@WD6AWP](https://community.allstarlink.org/u/WD6AWP)\ **Post date:** [May 1, 2021, 1:21pm UTC](https://community.allstarlink.org/t/beta-6-echolink-issue/18548/7 "2021-05-01T13:21:24Z")
> [@Scott](#): > > Yes Tim, I do get a list of stations. How about the stations you can’t connect to, are they in they in the list, Try this; replace ECHOTEST with the station you can’t connect ```auto asterisk -rx "echolink dbdump" | grep ECHOTEST 9999|*ECHOTEST*|204.236.179.116 ```