# ASL3 - Cannot connect using DTMF \*2 or \*3 commands from radio or Supermon
**URL:** https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670
**Category:** Archive
**Tags:** asl3
**Created:** [August 17, 2024, 7:44pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670 "2024-08-17T19:44:32Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 17, 2024, 7:44pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/1 "2024-08-17T19:44:32Z")
I am not able to connect to nodes using DTMF commands \*2 or \*3. All other DTMF commands defined in rpt.conf work. Yes I have checked ASL console and DTMF commands are being decoded when sent from a radio. Also when trying to issue \*2 or \*3 in Supermon does not work. \*1 does work to disconnect a node. It has to be a configuration issue somewhere.
---
### Author:  [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [August 17, 2024, 9:58pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/2 "2024-08-17T21:58:32Z")
Have you upgraded to the latest version of the software ?
or
What version are you using exactly ?
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 19, 2024, 10:55am UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/3 "2024-08-19T10:55:15Z")
The latest version 3.0.11.
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 20, 2024, 11:22am UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/4 "2024-08-20T11:22:51Z")
Asterisk will not even connect to another node using Asterisk CLI
```
node58846*CLI> rpt fun 58846 *355553
```
No response, no connection. If I connect to a node via Allmon3 I can disconnect from the node using
```
node58846*CLI> rpt fun 58846 *155553
```
I can reconnect to the node using:
```
node58846*CLI> rpt fun 58846 *30
```
So, what is going on?
---
### Author:  [@Mike](https://community.allstarlink.org/u/Mike)
#### Post date: [August 20, 2024, 12:35pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/5 "2024-08-20T12:35:31Z")
Surprised nobody on the dev team is answering these questions.
I am not even a asl3 user yet.
v3.3.0-1
> **[GitHub - AllStarLink/ASL3: AllStarLink Version 3](https://github.com/AllStarLink/ASL3)**
>
> AllStarLink Version 3. Contribute to AllStarLink/ASL3 development by creating an account on GitHub.
---
### Author:  [@KB4MDD](https://community.allstarlink.org/u/KB4MDD)
#### Post date: [August 20, 2024, 12:46pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/6 "2024-08-20T12:46:33Z")
Lets start with the cli command - `core show version`
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 20, 2024, 12:57pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/7 "2024-08-20T12:57:08Z")
So I am running the latest image 3.0.11.
From core show version
> node58846\*CLI\> core show version
> Asterisk 20.8.1+asl3-3.0.3-1.deb12 built by builder @ [allstarlink.org](http://allstarlink.org) on a aarch64 running Linux on 2024-07-16 23:20:31 UTC
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 20, 2024, 1:54pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/8 "2024-08-20T13:54:13Z")
A new phenomenon - I **can** connect to a node with **four digits**.
> rpt fun 58846 \*32462
This works.
Nodes greater then five digits = no joy.
---
### Author:  [@KB4MDD](https://community.allstarlink.org/u/KB4MDD)
#### Post date: [August 20, 2024, 2:03pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/9 "2024-08-20T14:03:02Z")
I think you need to update to [ASL3 3.0.4 Released](https://community.allstarlink.org/t/asl3-3-0-4-released/21628)
There was an issue with node lookup.
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 20, 2024, 2:18pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/10 "2024-08-20T14:18:48Z")
Ran the update. Still no joy…
Posted issued to GitHub page [https://github.com/AllStarLink/app\_rpt/issues/386](https://github.com/AllStarLink/app_rpt/issues/386)
---
### Author:  [@n7jrr](https://community.allstarlink.org/u/n7jrr)
#### Post date: [August 20, 2024, 8:40pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/11 "2024-08-20T20:40:37Z")
Turned out to be a DNS issue. The DNS assigned by my router DHCP was the problem. Made a manual entry in the Networking page to use 8.8.8.8 and 8.8.4.4. I can finally use my HT’s keypad to connect to other nodes. The guys monitoring the GitHub page helped me narrow down the problem. Thanks.
73 Andrew
de N7JRR
---
### Author:  [@system](https://community.allstarlink.org/u/system)
#### Post date: [August 23, 2024, 8:41pm UTC](https://community.allstarlink.org/t/asl3-cannot-connect-using-dtmf-2-or-3-commands-from-radio-or-supermon/21670/12 "2024-08-23T20:41:03Z")
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.