# ASL UI on Bookworm?

**URL:** <https://community.allstarlink.org/t/asl-ui-on-bookworm/25171>\
**Category:** AllStarLink\
**Created:** [November 11, 2026, 5:13pm UTC](https://community.allstarlink.org/t/asl-ui-on-bookworm/25171 "2026-11-11T17:13:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\
**Post date:** [November 11, 2026, 6:06pm UTC](https://community.allstarlink.org/t/asl-ui-on-bookworm/25171/2 "2026-11-11T18:06:52Z")

</div>

No, it does not. WebUI is not going to be backported to Debian 12 Bookworm. However you can do an in-place upgrade to Trixie. The basic steps are:

1. Login to your node via SSH or through the Cockpit terminal.

2. Become root with `sudo -s`

3. Run a backup of your node through the current `asl-menu` CLI tool

4. Run the following commands ONE AT A TIME DO NOT COPY AND PASTE ALL OF THEM:

5. Reboot your node

6. Login to your node via SSH or through the Cockpit terminal.

7. Run the following commands ONE AT A TIME DO NOT COPY AND PASTE ALL OF THEM:

8. You should now be running on Debian Trixie.

9. If you aren't running ASL3 Appliance, install **asl-web-ui** :

10. If you aren't running the appliance, you'll need to add your local user to the group. Assuming it's KC1NE then run `usermod -aG asl-web-ui KC1NE`.

It'll take a bit on a Pi using an SD card (Assuming that's what you're running).

---

_[View the full topic](https://community.allstarlink.org/t/asl-ui-on-bookworm/25171)._