# Asl-node-auth-check question **URL:** \ **Category:** AllStarLink\ **Tags:** asl3\ **Created:** [April 9, 2026, 5:39am UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466 "2026-04-09T05:39:47Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 5:39am UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/1 "2026-04-09T05:39:47Z")
What does: OK: Node registration config is well-formed OK: Node registration type is HTTP OK: [register.allstarlink.org](http://register.allstarlink.org) is reachable (via HTTP) OK: HTTP registration state is Registered OK: Perceived IAX IP:PORT for this node is: 136.49.198.155:4180 OK: Registered to [aws-east1a-register0.allstarlink.org](http://aws-east1a-register0.allstarlink.org) - 52.20.63.146 OK: Server-set UDP port matches bindport in iax.conf OK: Node registration within 10 minutes: 2026-04-09 05:31:56 UTC Info: Last time IP changed was 2026-03-30 15:56:42 UTC Warning: Node is not perceived as registered; not tested indicate from asl-node-auth-check ? ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:01am UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/2 "2026-04-09T06:01:00Z")
```auto OK: Node registration config is well-formed OK: Node registration type is HTTP OK: register.allstarlink.org is reachable (via HTTP) OK: HTTP registration state is Registered OK: Perceived IAX IP:PORT for this node is: 136.49.198.155:4180 OK: Registered to aws-east1a-register0.allstarlink.org - 52.20.63.146 OK: Server-set UDP port matches bindport in iax.conf OK: Node registration within 10 minutes: 2026-04-09 05:56:03 UTC Info: Last time IP changed was 2026-04-09 05:07:51 UTC ``` _ **Warning: Node is not perceived as registered; not tested** _ ---
**Author:** ![WN1L](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/w/77aa72/32.png) [@WN1L](https://community.allstarlink.org/u/WN1L)\ **Post date:** [April 9, 2026, 10:53am UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/3 "2026-04-09T10:53:57Z")
I have a similar report, but when I un commented in iax.conf the registration, it didn’t like having duplicate registration with rpt\_http\_registrations.conf ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 2:00pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/4 "2026-04-09T14:00:44Z")
What version of the asl3 package do you have? `dpkg -l asl3`? ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 2:03pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/5 "2026-04-09T14:03:41Z")
> [@WN1L](#): > > I have a similar report, but when I un commented in iax.conf the registration, it didn’t like having duplicate registration with rpt\_http\_registrations.conf You don't want or need duplicate registrations like that. That's why the script tells you to resolve it. ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 2:14pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/6 "2026-04-09T14:14:35Z")
If you have a version of the asl3 package that is _earlier_ than, 3.17, please do the following to get the latest version as there are several parsing fixes for weird configuration syntax: ```bash sudo wget -O/usr/bin/asl-node-auth-check https://repo.allstarlink.org/hotfix/asl-node-auth-check sudo chmod 755 /usr/bin/asl-node-auth-check sudo /usr/bin/asl-node-auth-check ``` ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 2:34pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/7 "2026-04-09T14:34:01Z")
# dpkg -l asl3 Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==============-============-============-================================= ii asl3 3.15-1.deb12 all AllStarLink 3 with latest version asl-node-auth-check I still get: ```auto OK: Node registration config is well-formed OK: Node registration type is HTTP OK: register.allstarlink.org is reachable (via HTTP) OK: HTTP registration state is Registered OK: Perceived IAX IP:PORT for this node is: 136.49.206.123:4180 OK: Registered to aws-east1a-register0.allstarlink.org - 52.20.63.146 OK: Server-set UDP port matches bindport in iax.conf OK: Node registration within 10 minutes: 2026-04-09 14:28:52 UTC Info: Last time IP changed was 2026-04-09 08:14:46 UTC ``` Warning: Node is not perceived as registered; not tested ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 4:37pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/8 "2026-04-09T16:37:01Z")
Interesting. That's telling you that the nodeping remote service doesn't perceive you as registered but that isn't matching the other state. What node specifically are you testing? ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:01pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/9 "2026-04-09T18:01:36Z")
It’s a new build of 46715. This has been running on ASL2 beta along with a P25 reflector and a P25 analog bridge. I want to make sure the ASL3 side is working properly before I install any DVSwitch stuff. ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 6:12pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/10 "2026-04-09T18:12:25Z")
Okay, I see what's happened here. In fixing another issue, I'm triggering the wrong error message for your case. What you're running into is that your system node isn't responding on UDP port 4180. I'll need to fix this in asl-node-auth-check. I'll poke at it tonight and get a new hotfix up for you to try. But your issue is that UDP/4180 isn't working inbound to your node. ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 6:15pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/11 "2026-04-09T18:15:10Z")
Specifically: ```auto https://nodeping.allstarlink.org/?node=46715 {"calleraddr":"127.0.0.1","ipv4":{"rc":-9,"status":"unreachable"},"version":"20260303.0"} ``` vs. ```auto https://nodeping.allstarlink.org/?node=2000 {"calleraddr":"127.0.0.1","ipv4":{"addr":"18.224.69.177","pingms":11,"port":4569,"rc":0,"status":"ok"},"version":"20260303.0"} ``` ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:22pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/12 "2026-04-09T18:22:26Z")
I also have a similar DMR node on 409873. This one doesn’t throw the warning/error. I’m thinkiing they should both behave similarly. Also, please keep in mind that 46715 doesn’t you have any DVSwitch stuff installed. It should be ASL3 good. What could be different in my installation? ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 6:29pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/13 "2026-04-09T18:29:24Z")
So those nodes are at the same IP but on different ports. 46715 is setup in the portal to be on UDP/4180 and you have 409873 configured to be on UDP/4550. Are these on the same system? If so, you need to align both nodes to use the same UDP port or do a NAT forward from 4180 to 4550. If these are on two different systems entirely than either you have the local firewall not properly configured on the ASL3 system (assuming you're using the appliance) or it's not NATing correctly. ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:29pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/14 "2026-04-09T18:29:39Z")
doesn’t yet have any . . . . not doesn’t you have any ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:34pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/15 "2026-04-09T18:34:21Z")
Those nodes are on separate Pi’s on different LAN IP’s and different ports. ‘Not connect in any way. The point is that they are similar in that they use rxchannel = USRP (in rpt.conf), because of the DVSwitch interface. ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [April 9, 2026, 6:34pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/16 "2026-04-09T18:34:47Z")
You're missing my point... this is about the port configured in iax.conf or in your firewall. It's not an ASL issue. ---
**Author:** ![Tom](https://community.allstarlink.org/user_avatar/community.allstarlink.org/tom/32/3049_2.png) [@Tom](https://community.allstarlink.org/u/Tom)\ **Post date:** [April 9, 2026, 6:45pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/17 "2026-04-09T18:45:55Z")
Testing node 46715: OK: Node registration config is well-formed OK: Node registration type is HTTP OK: [register.allstarlink.org](http://register.allstarlink.org) is reachable (via HTTP) OK: HTTP registration state is Registered OK: Perceived IAX IP:PORT for this node is: 136.49.132.79:4180 OK: Registered to [aws-east1a-register2.allstarlink.org](http://aws-east1a-register2.allstarlink.org) - 52.44.147.201 OK: Server-set UDP port matches bindport in iax.conf OK: Node registration within 10 minutes: 2026-04-09 18:43:47 UTC Info: Last time IP changed was 2026-04-09 18:40:44 UTC OK: Incoming connections to IAX from other nodes is successful Info: IAX ping test has a roundtrip time of 33ms OK: No problems detected with node 46715 ALL GOOD NOW! ‘Firewall issue – TNX AGN! ---
**Author:** ![system](https://community.allstarlink.org/uploads/default/original/2X/4/42700284e201b031bd667c3f63bbae05a74b3104.png) [@system](https://community.allstarlink.org/u/system)\ **Post date:** [April 12, 2026, 6:46pm UTC](https://community.allstarlink.org/t/asl-node-auth-check-question/24466/18 "2026-04-12T18:46:46Z")
Closed on April 12, 2026, 6:46pm UTC This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.