ok thanks
I will have a full report for the group on thurs/fri,
The issues for the net last night are much different set of issues than many think.
but no, the audio was amuck on 2 instances for the attempt.
...mike/kb8jnm
···
On 6/20/2018 10:39 AM, jimmy keffer wrote:
was in audio file made of the net i didn't get stay for it
jimmy ka3vgm
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just an fyi, I connected to 29993 and talked and could here anyone on the node that talked, but could not hear the net. Moved over to 29999 and could here net audio but dropped within a minute. Reconnect and same thing. I was recording it externally via sdr, but dropped too much. Will try again next net.
···
-------- Original message --------
From: Mike mm@midnighteng.com
Date: 6/20/18 12:09 PM (GMT-06:00)
To: app_rpt-users@lists.allstarlink.org
Subject: Re: [App_rpt-users] ASL Digital Radio/MMDVM Intro Tech “NET” Tues
I will have a full report for the group on thurs/fri,
The issues for the net last night are much different set of issues than
many think.
but no, the audio was amuck on 2 instances for the attempt.
…mike/kb8jnm
On 6/20/2018 10:39 AM, jimmy keffer wrote:
was in audio file made of the net i didn’t get stay for it
jimmy ka3vgm
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the “Unsubscribe or edit options button”
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> was in audio file made of the net i didn't get stay for it
> jimmy ka3vgm
Not this time. We will do the presentation again and make
sure there is
a audio archive.Steve
I should have an audio archive. I can concatenate the files and shrink them
into a reasonable-bitrate MP3 or AAC if there is interest; please respond if
interested. I had 2300 linked to 2600 for the duration (2300 was logging
audio). While there were a few occasions where it seemed like Steve or Mike
had lost connectivity for a few seconds, for the most part it was solid, no
disconnects/reconnects or anything that I noticed between here and 2600.
2600 seemed to have fewer issues than some of the other hubs; others were
reporting things like "we only heard 10% of what you said last time", yet I
heard it fine via 2600/2300. Steve and Mike, were you using 2600 as your
entry point?
--- Jeff WN3A
···
---
This email has been checked for viruses by Avast antivirus software.
Jeff,
It would be MOST appreciated if you could stitch together a archive.
Mike started and stayed on 2600 throughout. I started on 29999 and switched to 2600 when the problems arose.
Steve
···
On 6/20/2018 3:07 PM, Jeff DePolo wrote:
was in audio file made of the net i didn't get stay for it
jimmy ka3vgmNot this time. We will do the presentation again and make
sure there is
a audio archive.Steve
I should have an audio archive. I can concatenate the files and shrink them
into a reasonable-bitrate MP3 or AAC if there is interest; please respond if
interested. I had 2300 linked to 2600 for the duration (2300 was logging
audio). While there were a few occasions where it seemed like Steve or Mike
had lost connectivity for a few seconds, for the most part it was solid, no
disconnects/reconnects or anything that I noticed between here and 2600.
2600 seemed to have fewer issues than some of the other hubs; others were
reporting things like "we only heard 10% of what you said last time", yet I
heard it fine via 2600/2300. Steve and Mike, were you using 2600 as your
entry point?--- Jeff WN3A
---
This email has been checked for viruses by Avast antivirus software.
Download Free Antivirus Software | Avast 2024 PC Protection_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Jeff,
If you have them in the original form from a allstar archive production,
could you just zip them into one file and send them to me ?
I originally was going to make a script to allow playback with timed breaks just as it originally played (minus imperfections)
and connect that to a dummy node as a asset to be connected to and played back by command.
...mike/kb8jnm
···
On 6/20/2018 3:07 PM, Jeff DePolo wrote:
was in audio file made of the net i didn't get stay for it
jimmy ka3vgmNot this time. We will do the presentation again and make
sure there is
a audio archive.Steve
I should have an audio archive. I can concatenate the files and shrink them
into a reasonable-bitrate MP3 or AAC if there is interest; please respond if
interested. I had 2300 linked to 2600 for the duration (2300 was logging
audio). While there were a few occasions where it seemed like Steve or Mike
had lost connectivity for a few seconds, for the most part it was solid, no
disconnects/reconnects or anything that I noticed between here and 2600.
2600 seemed to have fewer issues than some of the other hubs; others were
reporting things like "we only heard 10% of what you said last time", yet I
heard it fine via 2600/2300. Steve and Mike, were you using 2600 as your
entry point?--- Jeff WN3A
---
This email has been checked for viruses by Avast antivirus software.
Download Free Antivirus Software | Avast 2024 PC Protection_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
is this tech net still going on now days and if so can someone confirm node number, day and time?