# ASL 3 - Wyse Dell 3040 hanging on shutdown -r now

**URL:** <https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300>\
**Category:** Archive\
**Created:** [July 4, 2024, 6:32pm UTC](https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300 "2024-07-04T18:32:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![NU5D](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/edb3f5/32.png) [@NU5D](https://community.allstarlink.org/u/NU5D)\
**Post date:** [July 4, 2024, 6:32pm UTC](https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300/1 "2024-07-04T18:32:03Z")

</div>

At the risk or crying wolf a 2nd time - anyone else having shutdown -r now causing the PC to hang - have to actually cycle power to get going again ??? Debian 12 / ASL 3 - PS Allmon3 is really neat - first time out and very neat and clean… de nu5d

More to the story - shutdown -r now did hang - but this seems to coincide with the CM108 being plugged into a USB-2 (not USB-3) port with usb radio - does not seem to matter with simple usb… still kicking the tires. steve

---

<div class="post-metadata">

**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\
**Post date:** [July 4, 2024, 9:33pm UTC](https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300/2 "2024-07-04T21:33:14Z")

</div>

Do you have a monitor on the system and can you report where it’s hanging in the shutdown process?

---

<div class="post-metadata">

**Author:** ![NU5D](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/n/edb3f5/32.png) [@NU5D](https://community.allstarlink.org/u/NU5D)\
**Post date:** [July 4, 2024, 10:24pm UTC](https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300/3 "2024-07-04T22:24:17Z")

</div>

I have it headless for now - I typically run shutdown -r at midnight on repeater stations - thinking about first systemctl stop asterisk and then shutdown -r and see what happens… A learning experience for me… steve

---

<div class="post-metadata">

**Author:** ![AB0LV](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/a/ecc23a/32.png) [@AB0LV](https://community.allstarlink.org/u/AB0LV)\
**Post date:** [August 26, 2024, 1:01pm UTC](https://community.allstarlink.org/t/asl-3-wyse-dell-3040-hanging-on-shutdown-r-now/21300/4 "2024-08-26T13:01:42Z")

</div>

In case you didn’t get this working, I ran into the same issue when installing ASL3 on my Dell Wyse 3040’s.

After installing Debian 12 be sure to edit the blacklist.conf file as described here:

> **[InstallingDebianOn/Dell/Wyse 3040 - Debian Wiki](https://wiki.debian.org/InstallingDebianOn/Dell/Wyse%203040)**
>
> How to install Debian/Linux on a Dell Wyse 3040

Then update the Wyse 3040 bios as described here:  
[https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=94ddh](https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=94ddh)

After doing this, no more hanging on reboot or shutdown.