# Anyone successfully used orangepi 3

**URL:** <https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904>\
**Category:** Archive\
**Created:** [March 3, 2024, 2:50pm UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904 "2024-03-03T14:50:27Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bruce16](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/b/dc4da7/32.png) [@Bruce16](https://community.allstarlink.org/u/Bruce16)\
**Post date:** [March 3, 2024, 2:50pm UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904/1 "2024-03-03T14:50:27Z")

</div>

Been digging around and haven’t found anything about  
Orangepi 3 on Allstar.  
Anyone get lucky.  
Bruce  
Ve3bv  
53554

---

<div class="post-metadata">

**Author:** ![Mike](https://community.allstarlink.org/user_avatar/community.allstarlink.org/mike/32/1569_2.png) [@Mike](https://community.allstarlink.org/u/Mike)\
**Post date:** [March 4, 2024, 2:47pm UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904/2 "2024-03-04T14:47:05Z")

</div>

I would say your bet bet is installing a compatible rasbian os and then follow this

> **[GitHub - Allan-N/ASL-Install: Build, install, and configure AllStarLink on...](https://github.com/Allan-N/ASL-Install)**
>
> Build, install, and configure AllStarLink on \[recent\] OS platforms - Allan-N/ASL-Install

---

<div class="post-metadata">

**Author:** ![NurcDiver](https://community.allstarlink.org/user_avatar/community.allstarlink.org/nurcdiver/32/3580_2.png) [@NurcDiver](https://community.allstarlink.org/u/NurcDiver)\
**Post date:** [February 12, 2025, 6:35am UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904/3 "2025-02-12T06:35:48Z")

</div>

Did you ever have any luck with this? been fighting a 3B for a bit now. I’m able to install their debian server package and install asl3 afterwards but getting lots of errors and simple usb is not communicating. any info if you made progress would be appreciated as i would really like to use the emmc board instead of the sd card method. System i’m trying to use:  
Operating System: Debian GNU/Linux 12 (bookworm)  
Kernel: Linux 5.10.160-rockchip-rk356x  
Architecture: arm64

---

<div class="post-metadata">

**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\
**Post date:** [February 12, 2025, 4:18pm UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904/4 "2025-02-12T16:18:31Z")

</div>

As long as you can install normal Debian 12 bookworm and whatever provides that kernel has a corresponding headers package that’ll work properly with DKMS, it should in general just work. I’m using ASL3 on a generic arm64 platform and it works fine.

Now, if that kernel has problems with things like `snd_pcm_oss` or items needed to build any of the DAHDI modules, then you’re not going to have success.

---

<div class="post-metadata">

**Author:** ![NurcDiver](https://community.allstarlink.org/user_avatar/community.allstarlink.org/nurcdiver/32/3580_2.png) [@NurcDiver](https://community.allstarlink.org/u/NurcDiver)\
**Post date:** [February 16, 2025, 8:38am UTC](https://community.allstarlink.org/t/anyone-successfully-used-orangepi-3/20904/5 "2025-02-16T08:38:32Z")

</div>

so far, the orangepi is winning but I won’t be defeated! 🙂