# AllStar Link SIP Trunk in FreePBX

**URL:** <https://community.allstarlink.org/t/allstar-link-sip-trunk-in-freepbx/11750>\
**Category:** AllStarLink\
**Created:** [February 18, 2015, 3:59am UTC](https://community.allstarlink.org/t/allstar-link-sip-trunk-in-freepbx/11750 "2015-02-18T03:59:56Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Doug](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/d/dbc845/32.png) [@Doug](https://community.allstarlink.org/u/Doug)\
**Post date:** [February 18, 2015, 6:44am UTC](https://community.allstarlink.org/t/allstar-link-sip-trunk-in-freepbx/11750/4 "2015-02-18T06:44:34Z")

</div>

James,  
Here is what I have to dial sip to Allstarlink…  
In sip.conf  
[allstar]  
type=peer  
[host=sip.allstarlink.org](http://host=sip.allstarlink.org)  
username=1  
disallow=all  
allow=ulaw  
dtmfmode=rfc2833  
nat=yes  
In extensions…  
exten =\> 549,1,Dial(SIP/@allstar,120,WT)  
exten =\> 549,2,Hangup()  
This is in my PBX system. When I dial 549 it rings and I get the voice prompts. You have enter several things node number, mode, pin number. This works fine for me but I am using standard old version Asterisk for my PBX on a PC.  
Are you trying to automatically enter the node, etc to the attendant? If so it might be a timing issue. I have never used FreePBX but I would think you could open a ssh session to a Linux prompt and enter the Asterisk client and be able to see some info that might be helpful during call progress.  
**73 Doug  
WA3DSP  
 [http://www.crompton.com/hamradio](http://www.crompton.com/hamradio)**

> **···**
>
> * * *
> 
> From: [james@lyljtlabs.com](mailto:james@lyljtlabs.com)  
> To: [doug@crompton.com](mailto:doug@crompton.com)  
> CC: [app\_rpt-users@ohnosec.org](mailto:app_rpt-users@ohnosec.org)  
> Date: Tue, 17 Feb 2015 23:58:23 -0500  
> Subject: RE: [App\_rpt-users] AllStar Link SIP Trunk in FreePBX
> 
> Doug,
> 
> This is an Asterisk/FreePBX server on my end. And I’m trying to connect into the AllStar Link network’s direct SIP/public telephone portal ([https://allstarlink.org/support.html#telephoneportal](https://allstarlink.org/support.html#telephoneportal)) not another node I have control over. I don’t have any access to the AllStar Link network side of this call. The public access portal should let me dial node numbers once I connect. But I’m just dialing in as a user. I might be configuring my Asterisk box wrong and shouldn’t be using a trunk?
> 
> Thanks,
> 
> James

---

_[View the full topic](https://community.allstarlink.org/t/allstar-link-sip-trunk-in-freepbx/11750)._