# Allstar 2 installation

**URL:** <https://community.allstarlink.org/t/allstar-2-installation/21514>\
**Category:** Archive\
**Created:** [July 26, 2024, 7:25pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514 "2024-07-26T19:25:51Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Coper](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@Coper](https://community.allstarlink.org/u/Coper)\
**Post date:** [July 26, 2024, 7:25pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/1 "2024-07-26T19:25:51Z")

</div>

Hello,

Where can I get the install for All star 2. I tried the ASL3 and it’s not quite working.  
I want to reinstall ASL2

Thanks

---

<div class="post-metadata">

**Author:** ![K6CRS](https://community.allstarlink.org/user_avatar/community.allstarlink.org/k6crs/32/2609_2.png) [@K6CRS](https://community.allstarlink.org/u/K6CRS)\
**Post date:** [July 26, 2024, 8:34pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/2 "2024-07-26T20:34:22Z")

</div>

Installing ASL2 requires Debian 10 (Buster), which is no longer updated/maintained. Are you sure you want to go down that rabbit hole?

---

<div class="post-metadata">

**Author:** ![WA3WCO](https://community.allstarlink.org/user_avatar/community.allstarlink.org/wa3wco/32/3123_2.png) [@WA3WCO](https://community.allstarlink.org/u/WA3WCO)\
**Post date:** [July 26, 2024, 8:43pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/3 "2024-07-26T20:43:48Z")

</div>

What issues are you having with ASL3?

Are you using a Raspberry Pi? an x86\_64/amd64 device? a VM?

Are you trying to interface with a radio? and, if so, what audio adapter are you using?

---

<div class="post-metadata">

**Author:** ![Coper](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@Coper](https://community.allstarlink.org/u/Coper)\
**Post date:** [July 27, 2024, 4:27am UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/4 "2024-07-27T04:27:11Z")

</div>

Hi!  
For one the node remote was not working. But you responded \*Resolved  
When it does run it never connects to a Node like 55553 parrot node or any of them. Resolved connected directly via ethernet  
I use a Shari pi HAT (I wonder if there FW update) Awaiting a reply

---

<div class="post-metadata">

**Author:** ![Coper](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@Coper](https://community.allstarlink.org/u/Coper)\
**Post date:** [July 27, 2024, 5:54pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/5 "2024-07-27T17:54:31Z")

</div>

Now I am running a PI Shari and it is getting hot

 ![Capture](https://community.allstarlink.org/uploads/default/original/2X/c/c6b08f28136422e7911478ff8e04c61dc3e7f086.jpeg)

---

<div class="post-metadata">

**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\
**Post date:** [July 27, 2024, 9:45pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/6 "2024-07-27T21:45:21Z")

</div>

51C is not terribly hot for a Pi, especially if you only have passive cooling.

---

<div class="post-metadata">

**Author:** ![Coper](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/c/53a042/32.png) [@Coper](https://community.allstarlink.org/u/Coper)\
**Post date:** [July 28, 2024, 8:02pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/7 "2024-07-28T20:02:44Z")

</div>

OK, Supermon is no longer available?

---

<div class="post-metadata">

**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\
**Post date:** [July 28, 2024, 9:45pm UTC](https://community.allstarlink.org/t/allstar-2-installation/21514/8 "2024-07-28T21:45:28Z")

</div>

Supermon is not an AllStarLink application. The AllStarLink application for node control is Allmon3 as documented in the manual.
