# Allmon3 page - NO node? **URL:** \ **Category:** AllStarLink\ **Created:** [March 27, 2025, 5:28pm UTC](https://community.allstarlink.org/t/allmon3-page-no-node/23086 "2025-03-27T17:28:56Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![k1jax](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/cc9497/32.png) [@k1jax](https://community.allstarlink.org/u/k1jax)\ **Post date:** [March 27, 2025, 5:28pm UTC](https://community.allstarlink.org/t/allmon3-page-no-node/23086/1 "2025-03-27T17:28:56Z")
im new to Allstar, this is my 1st install. when i load the allmon3 page there is no node, what do i need to check ot what am i doing wrong, in the ASL menu / Diagnostics / show allstar registrations i can see “1 HTTP registration” Thank you ---
**Author:** ![KD3CSR](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/e8c25b/32.png) [@KD3CSR](https://community.allstarlink.org/u/KD3CSR)\ **Post date:** [March 27, 2025, 7:19pm UTC](https://community.allstarlink.org/t/allmon3-page-no-node/23086/2 "2025-03-27T19:19:40Z")
Hi! It could be that you have not set your node details in /etc/allmon3/allmon3.ini Could you confirm you have done that? [Configuration - AllStarLink Manual](https://allstarlink.github.io/allmon3/config/) has some examples that you could use at the end of the file. Host would be 127.0.0.1 if allmon3 is installed on the same system as asl3 and user pass would be the ones from your /etc/asterisk/manager.conf file, usually default is under [admin] part so user will be admin. Let us know if it works. ---
**Author:** ![k1jax](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/cc9497/32.png) [@k1jax](https://community.allstarlink.org/u/k1jax)\ **Post date:** [March 27, 2025, 9:41pm UTC](https://community.allstarlink.org/t/allmon3-page-no-node/23086/3 "2025-03-27T21:41:57Z")
that got it, took a minute to get the password setup thaNK YOU