# Allmon2 error and inability to load files **URL:** \ **Category:** AllStarLink\ **Created:** [February 28, 2021, 11:58pm UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322 "2021-02-28T23:58:06Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![KE8SO](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/6bbea6/32.png) [@KE8SO](https://community.allstarlink.org/u/KE8SO)\ **Post date:** [February 28, 2021, 11:58pm UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322/1 "2021-02-28T23:58:06Z")
I am very new to the allstar link. I have the ASL software loaded on a Pi3B+. Allstar shows that I key my node. I started the Allmon2 set up by typing the command … sudo apt install git my response is: Reading package lists… Done Building dependency tree Reading state information… Done The following additional packages will be installed: git-man liberror-perl rsync Suggested packages: git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-arch git-cvs git-mediawiki git-svn The following NEW packages will be installed: git git-man liberror-perl rsync 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 5,168 kB/5,195 kB of archives. After this operation, 27.0 MB of additional disk space will be used. Do you want to continue? [Y/n] Y When I answer yes, this is the response Err:1 [http://mirrordirector.raspbian.org/raspbian](http://mirrordirector.raspbian.org/raspbian) stretch/main armhf git-man all 1:2.11.0-3+deb9u2 404 Not Found [IP: 2a00:1098:0:80:1000:75:0:3 80] Where am I screwing this up? thank you in advance Dave ---
**Author:** ![KK9ROB](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk9rob/32/1783_2.png) [@KK9ROB](https://community.allstarlink.org/u/KK9ROB)\ **Post date:** [March 1, 2021, 12:54am UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322/2 "2021-03-01T00:54:57Z")
Try running `apt-get update` first. That should solve it 🙂 Cheers, Rob ---
**Author:** ![KE8SO](https://community.allstarlink.org/letter_avatar_proxy/v4/letter/k/6bbea6/32.png) [@KE8SO](https://community.allstarlink.org/u/KE8SO)\ **Post date:** [March 1, 2021, 11:18am UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322/3 "2021-03-01T11:18:59Z")
That seems to have fixed the issue. Thank you. The next step is sudo git clone [https://github.com/tsawyer/sudo:](https://github.com/tsawyer/sudo:) git: command not found allmon2.git /var/www/html/allmon2 the reply is sudo: git: command not found I tried getting the update again with the same response ---
**Author:** ![KK9ROB](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk9rob/32/1783_2.png) [@KK9ROB](https://community.allstarlink.org/u/KK9ROB)\ **Post date:** [March 1, 2021, 12:04pm UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322/4 "2021-03-01T12:04:16Z")
Edit: **I see that you already installed git. Doh. Sometimes you need to log off and log back in for something to show up in the path.** Go ahead and try: sudo apt -y install git sudo git clone [https://github.com/AllStarLinkInc/allmon2.git](https://github.com/AllStarLinkInc/allmon2.git) You have many more steps ahead of you, so I suggest following this guide: [https://wiki.allstarlink.org/wiki/Allmon2\_Install](https://wiki.allstarlink.org/wiki/Allmon2_Install) ---
**Author:** ![KK9ROB](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk9rob/32/1783_2.png) [@KK9ROB](https://community.allstarlink.org/u/KK9ROB)\ **Post date:** [March 8, 2021, 7:12am UTC](https://community.allstarlink.org/t/allmon2-error-and-inability-to-load-files/18322/5 "2021-03-08T07:12:27Z")
Were you able to resolve all of your issues?