# All connections fail **URL:** \ **Category:** AllStarLink\ **Tags:** allmon3\ **Created:** [August 6, 2026, 9:48pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892 "2026-08-06T21:48:41Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![KI5UXC](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ki5uxc/32/4508_2.png) [@KI5UXC](https://community.allstarlink.org/u/KI5UXC)\ **Post date:** [August 6, 2026, 9:48pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/1 "2026-08-06T21:48:41Z")
My node - 67419 - shows unavailable. If I try connecting to a repeater, announce says connection failed. Then I disconnect all nodes and try another repeater. Same result. my AllStar Node has been working for quite awhile (since the first of the year or so) and this behavior just popped up. Rebooted Raspberry Pi (5) and Shari node. Logged in and out. What else can I check? Thanks, Lp - KI5UXC ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [August 6, 2026, 10:17pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/2 "2026-08-06T22:17:32Z")
Please run `asl-node-auth-check` and post the results. ---
**Author:** ![KI5UXC](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ki5uxc/32/4508_2.png) [@KI5UXC](https://community.allstarlink.org/u/KI5UXC)\ **Post date:** [August 9, 2026, 8:02pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/3 "2026-08-09T20:02:08Z")
> [@N8EI](#): > > `asl-node-auth-check` -----===== AllStarLink Node Authentication Check =====----- Checking configuration: Info: rpt.conf has configuration for: 67419 Info: /etc/asterisk/iax.conf contains no registration lines. Info: /etc/asterisk/rpt\_http\_registrations.conf contains 1 registration line(s) Info: Registrations present for configured node(s): 67419 Info: IP from [https://conntest-east1.allstarlink.org/ip](https://conntest-east1.allstarlink.org/ip) reports: 97.134.130.27 Info: IP from [https://conntest-west1.allstarlink.org/ip](https://conntest-west1.allstarlink.org/ip) reports: 97.134.130.27 Info: IP from [https://conntest-west2.allstarlink.org/ip](https://conntest-west2.allstarlink.org/ip) reports: 97.134.130.27 Info: IP from udp://conntest-east1.allstarlink.org:4570 reports: 97.134.130.27 Info: IP from udp://conntest-west1.allstarlink.org:4569 reports: 97.134.130.27 Info: IP from udp://conntest-west2.allstarlink.org:4569 reports: 97.134.130.27 OK: HTTP IP probes have consensus on the same perceived IP OK: IAX IP probes have consensus on the same perceived IP Testing node 67419: OK: Node registration config is well-formed OK: Node registration type is HTTP OK: [register.allstarlink.org](http://register.allstarlink.org) is reachable (via HTTP) OK: HTTP registration state is Registered OK: Perceived IAX IP:PORT for this node is: 97.134.130.27:4569 OK: Registered to [aws-east1a-register0.allstarlink.org](http://aws-east1a-register0.allstarlink.org) - 52.20.63.146 OK: Server-set UDP port matches bindport in iax.conf Traceback (most recent call last): File "/usr/bin/asl-node-auth-check", line 681, in main() File "/usr/bin/asl-node-auth-check", line 654, in main e, r = check\_node\_status(node) ^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/bin/asl-node-auth-check", line 394, in check\_node\_status reg\_since = node\_reginfo[0]['regseconds'] ~~~~~~~~~~~~ ^^^ IndexError: list index out of range ki5uxc@ki5uxc:~ $ ---
**Author:** ![KI5UXC](https://community.allstarlink.org/user_avatar/community.allstarlink.org/ki5uxc/32/4508_2.png) [@KI5UXC](https://community.allstarlink.org/u/KI5UXC)\ **Post date:** [August 9, 2026, 8:08pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/4 "2026-08-09T20:08:28Z")
Also, I noticed that I see the following under KI5UXC Nodes: ## **KI5UXC Nodes** Click a node number below to edit it. | Node Number | Server | Callsign | Password | Currently Registered | Last Reg (UTC) | Via WebTrans | Via Telephone | NNX | | --- | --- | --- | --- | --- | --- | --- | --- | --- | | [674190](https://allstarlink.org/portal/nodes.php?call=KI5UXC&id=100172&action=edit) | 4708rcl | KI5UXC | | No | Never | Yes | Yes | Yes | | [674191](https://allstarlink.org/portal/nodes.php?call=KI5UXC&id=100173&action=edit) | 4708rcl | KI5UXC | | No | Never | Yes | Yes | Yes | I do not know how these 2 nodes got created. I didn't do it. (At least I do not think that I did.) Could this be a contributing factor? Thanks for any assistance you can give. ---
**Author:** ![KK6RQ](https://community.allstarlink.org/user_avatar/community.allstarlink.org/kk6rq/32/3511_2.png) [@KK6RQ](https://community.allstarlink.org/u/KK6RQ)\ **Post date:** [August 9, 2026, 8:28pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/5 "2026-08-09T20:28:28Z")
You evidently NNX expanded 67419, so, in effect, it doesn't exist anymore. It's now 674190. So you can either: Go back into node settings and reverse the NNX, restoring 674190 back to 67419 or Reconfigure your node to the new 6 digit number. ps. The 674191 number is there because when you turn on NNX, it always adds the next node number in the sequence. Subsequently, you can add the sequential next eight node numbers, as needed. ---
**Author:** ![N8EI](https://community.allstarlink.org/user_avatar/community.allstarlink.org/n8ei/32/4254_2.png) [@N8EI](https://community.allstarlink.org/u/N8EI)\ **Post date:** [August 9, 2026, 11:55pm UTC](https://community.allstarlink.org/t/all-connections-fail/24892/6 "2026-08-09T23:55:16Z")
Please also run a software update. You have an old version of ASL3 if you're getting that error.