# \*4 remote commands

**URL:** <https://community.allstarlink.org/t/4-remote-commands/25026>\
**Category:** AllStarLink\
**Created:** [September 26, 2026, 2:00am UTC](https://community.allstarlink.org/t/4-remote-commands/25026 "2026-09-26T02:00:03Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![K0KN](https://community.allstarlink.org/user_avatar/community.allstarlink.org/k0kn/32/1887_2.png) [@K0KN](https://community.allstarlink.org/u/K0KN)\
**Post date:** [September 26, 2026, 2:00am UTC](https://community.allstarlink.org/t/4-remote-commands/25026/1 "2026-09-26T02:00:04Z")

</div>

Hello all. Been trying to remotely commands one of my nodes using \*4 but the remote node does not seem to acknowledge the DTMF at all. I have both CLIs pulled up and see the local node decoding DTMF but the remote node shows nothing.

Searched around for a newer parameter I might be missing etc but no luck. Anyone using \*4 these days for remote commands that has a tip?

Thanks. 73

Kyle

K0KN

---

_[View the full topic](https://community.allstarlink.org/t/4-remote-commands/25026)._